Configuration - Major XLR5 User Manual

1 > OUTP.
SPEED
2 > MERGE
MODE
ODE
3 > INP A
ABC | F INP |
OFFSET
MODE
ODE
ABC | HTPF
4 > INP B
ABC | F INP |
OFFSET
MODE
ABC | HTPF
5 > INP C
OFFSET
6 > DISP.
CONTROL
7 > USER-
RESET
Version: 1.05, 05.10.18
4

Configuration

All configuration settings of the device (except the line termination switch)
can be adjust via the menu.
Two push buttons are located to the left and right of the plain text display.
The upper left "MENU / ESC" - key is used to enter the "configuration
menu".
Any deactivated display is automatically switched on.
If no key is pressed within 15 seconds in the activated menu function, the
menu operation is automatically terminated WITHOUT CHANGING
CONFIGURATION DATA and the module returns to the STANDARD
OPERATING MODE. Entries already made in the individual submenus
are also lost.
After the first press of the left "MENU" - key, the first submenu is
proposed for selection. Use the two "UP/DOWN" - keys to the right of the
display to scroll to the desired submenu item in both directions.
The current software version V1.03 offers the following menu items:
to set the transmission speed for the output
(44 / 33 / 22 Hz)
to select the Merge-Modus (HTP / LOW (LoTP) / LTP)
to specify the DMX insert address for input A
to specify the DMX insert address for input B
to specify the DMX insert address for input C
to activate / deactivate the function for the automatic "display-dark
switching"
to trigger a warm start for the device
7