Technical Parameters; Parts Of The Product; Explanation Of Symbols - Strend Pro SS18 Instruction Manual

Use the device only for its intended purpose. Any other use is considered a case of misuse. The user / operator
and not the manufacturer will be responsible for any damage or injury caused by this misuse. Please note
that this device has not been designed for commercial or industrial use. The warranty will not be valid if the
equipment is used for commercial, industrial or similar purposes.
MAX. WATER PRESSURE PERMITTED TO ENTER THE
VALVE (not more than 3 bar)
BASE DIMENSIONS
1 CONTROL LEVER
2 SHOWER HEAD
5 WATER TAP
Read the instructions for use.
Do not dispose of as normal household waste. Instead, contact your recycling center in an
environmentally friendly way. Please take care of environmental protection.
The product complies with the applicable European directives and the conformity
assessment method of these directives has been implemented.
Packaging materials are recyclable. Please do not dispose of the packaging material in your
household waste, but hand it in at the secondary collection point.
A financial contribution has been made for the recovery and further recycling of the
container.

TECHNICAL PARAMETERS

TYPE
TANK VOLUME
HEIGHT
WEIGHT

PARTS OF THE PRODUCT

EXPLANATION OF SYMBOLS

SS18
18 l
1,5 bar
205 cm
6,3 kg
16 x 16
cm
3 SHOWER HEAD HOLDER
4
SS20/2 SSC20F
20 l 20 l
1,5 bar 1,5 bar
216 cm 216 cm
6,5 kg 6,8 kg
16 x 16 16 x 16
cm cm
BASE
SSP38F
38 l
1,5 bar
205 cm
9 kg
20 x 20
cm