Advertisement
Quick Links
Scope of Supply/Bill of Material & Mounting Drawings
Part Number: H-CB500X-07-01-SL / H-CB500X-07-02
Part Description: GPS BAR –HONDA CB500X
Applicable to Finished colour versions of Black and Silver
Installation / Parts List / Bill of Material for Mounting
Copyright By SRC
Design and Specification are subjected to change
Page 1
Advertisement
Related Manuals for SRC H-CB500X-07-01-SL
Summary of Contents for SRC H-CB500X-07-01-SL
- Page 1 Scope of Supply/Bill of Material & Mounting Drawings Part Number: H-CB500X-07-01-SL / H-CB500X-07-02 Part Description: GPS BAR –HONDA CB500X Applicable to Finished colour versions of Black and Silver Installation / Parts List / Bill of Material for Mounting Copyright By SRC...
-
Page 2: Mounting Drawings
MOUNTING DRAWINGS Copyright By SRC Design and Specification are subjected to change Page 2... - Page 3 4 mounting screws,(as shown) and remove the Windshield Guard and keep it aside. This will facilitate, access for the mounting of SRC GPS Bar Step 2: Step 2: Unscrew the 4 mounting screws (2 on each side) of the Windshield Mounting Bracket, as shown.
- Page 4 Windshield bracket to the top two holes, of the Inner bracket. It is moving down, by One-pitch distance of the Mounting holes in both the Windshield bracket and the Inner bracket Copyright By SRC Design and Specification are subjected to change Page 4...
- Page 5 Mounting of the GPS Bar to the Body of the GPS Bar, can be done off-line too. Step 5: Tighten the Screws fully to the torque, as specified in the BOM table Copyright By SRC Design and Specification are subjected to change Page 5...
- Page 6 Step 6: The Windshield Guard, can be mounted back in its original position Step 7: The final mounted condition of the GPS Bar is as shown. Copyright By SRC Design and Specification are subjected to change Page 6...
-
Page 7: General Instructions
Vehicle. We have prepared this based on our experience and knowledge, related to the Vehicle, Part and its functional aspects. 3. SRC cannot guarantee the interchangeability of the parts to any other manufacturer’s accessory part. It is advised to the User, to inspect and ensure the original state of all other Vehicle parts.