Base Unit Dimensions - Carrier 50EJ Installation, Start-Up And Service Instructions Manual

OPERATING
UNIT SIZE
WEIGHT
50EJ/EK
(lb)
024 4016 5-11
028 4102 5- 8
030 4102 5- 8
034 4102 5- 8
Fig. 3 — Base Unit Dimensions, 50EJ/EK024-034
CORNER WEIGHT
A B
(lb)
ft-in. ft-in. 1 2
3 ⁄ 3-5 11 ⁄ 823 914
8 16
⁄ 3-7 ⁄ 844 859
1 5
2 8
1 ⁄ 3-7 5 ⁄ 844 859
2 8
1 ⁄ 3-7 5 ⁄ 844 859
2 8
4
NOTES:
1. Weights include economizer (Std)
2. Center of gravity.
3. Do not locate adjacent units with dis-
charge facing economizer inlet. Mini-
mum clearances to be:
Adjacent Units: 15 -0
Top of Units: No overhang
Condenser Coil: 4 -0
Economizer Side: 6 -0
Filter Access Side: 10 -0 (for re-
moval of evaporator coil)
4. For smaller service and operational
clearances, contact Carrier Applica-
tion Engineering department.
5. Bottom ducts designed to be attached
to accessory roof curb. If unit is mounted
on dunnage, it is recommended the
ducts be supported by cross braces as
done on accessory roof curb.
6. Dimensions are in inches. Dimen-
sions in [ ] are in millimeters.
7. For units with electric heat, a field-
supplied 90° elbow must be installed
in the supply ductwork below the unit
discharge.
LEGEND
VFD — Variable Frequency Drive
3 4
1199 1080
1210 1189
1210 1189
1210 1189