Page 1
The lightning flash with arrowhead symbol within an equilateral triangle is intended to alert the user to the presence of uninsulated “dangerous voltage” within the product’s enclosure that may be of sufficient magnitude to constitute a risk of electric shock. The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operation and servicing instructions in the literature accompanying the appliance.
Page 2
WARNING: To prevent fire or shock hazard, do not expose this device to rain or moisture. Dangerous high voltage is present inside the enclosure. Do not open the cabinet. Note: If the product suddenly has no response or powers off, an electrostatic discharge may be the cause. In this circumstance, please follow the procedures below for recovery: •...
Important Safety Instructions Warnings and precautions To prevent any injuries, the following safety precautions should be observed in the installation, use, servicing and maintenance of this equipment. Before operating this equipment, please read this manual completely, and keep it nearby for future reference. Important Safety Instructions Read Instructions: All the safety and operating instructions should be read before the product is operated.
Page 4
Important Safety Instructions Antenna Safety Instructions If an outdoor antenna is connected, follow the precautions below: • An outdoor antenna should not be located in any area where it could come in contact with overhead power lines, or any other electric light or power circuits. •...
Table of Contents Table Of Contents Precautions Important Safety Instructions Main Feature-----------------------------------------------------------------------------------------------------------------------------1 Package Contents-----------------------------------------------------------------------------------------------------------------2 Unit View---------------------------------------------------------------------------------------------------------------------3 Remote Control ------------------------------------------------------------------------------------------------------------------4 Cable Connections----------------------------------------------------------------------------------------------------------------7 TV Function----------------------------------------------------------------------------------------------------------------11 AV Function-----------------------------------------------------------------------------------------------------------------------------15 PC Function----------------------------------------------------------------------------------------------------------------------------16 DVD Operation-------------------------------------------------------------------------------------------------------------------------17 USB/Card Access--------------------------------------------------------------------------------------------------------------18 DVD Playback Function-----------------------------------------------------------------------------------------------------------19 DVD Setup----------------------------------------------------------------------------------------------------------------------------21 Troubleshooting -----------------------------------------------------------------------------------------------------------------------23 Specifications ----------------------------------------------------------------------------------------------------------------------24...
This product incorporates the LCD display and the TV receiver in one system. Multiple Mode S-VIDEO COMPONENT HDMI High Quality Property High Resolution Adopt an MPEG2 decoding format to achieve horizontal resolution more than 500 lines. Superior sound Built-in Dolby Digital decoder to output high quality sound effects. Screen Support the picture size of a normal screen (4:3) and a wide screen (16:9) LCD (Liquid Crystal Display)
Package Contents Please make sure the following items are included with your LCD TV/monitor. If any item is missing, contact your dealer. a, Main Unit b, Power Cord & RCA Cable c, Remote Control Unit...
1. TFT SCREEN Present high resolution pictures 2. POWER INDICATOR The indicator lights bright blue when the TV is on, it will dim when the TV is turned off (standby mode). 3. REMOTE SENSOR Sense the remote control signal. 4. VOL+/- Adjust sound output level.
Remote Control Drawing 1. POWER Turn the unit on or off (standby). 2. Numeric Keypad Input numberic data. Access the TV channel directly. 3. Sub-channel Selector <-> This button is usually used with the numeric keypad to tune to a channel substation (e.g., 4-1, 4-2). e.g.
Page 10
20. ANGEL Some discs are recorded with Multi-angle, press this button to chose the desired viewing angle. 21. OPEN/CLOSE In the DVD mode, press this button to take in/out disc automatically. 22. RETURN Reveal the previously viewed channel. 23. Skip Forward Repeatedly press this button to skip forward through DVD playback.
Page 11
Remote Control Preparation • Remove the battery compartment cover located on the rear of the remote control. Insert 2 x “AAA” batteries, making sure to match their polarities (+/-) to the markings on the inside of the compartment. Replace the cover. •...
Cable Connections Antenna/Power Connection Connect TV RF sources to the Coaxial TV Antenna In jack. TV RF signals include: receiving antenna/ CATV net. You can use 75 Ohm coaxial cable to connect outdoor antenna. Insert one end of the supplied power cord to the player’s power jack and the other end to a 110-240V AC wall outlet.
Page 13
Cable Connections Coaxial Output - Digital Audio Output Connector If you are using the built-in TV tuner, you may want to play the TV audio through your stereo system for better sound quality. Select TV from the Input source menu to use this connection to watch TV with digital audio sound.
Page 14
Cable Connections HDMI Input HDMI (High Definition Multimedia Interface) is a new type of connection that transmits digital audio and video signals simultaneously over a single cable. A HDMI cable is required for the HDMI connection.This cable has a male HDMI Type-A connector on each end, carrying both digital video and audio. These HDMI input connectors are capable of receiving video at resolutions up to 1080p (1080-progressive).
Page 15
Cable Connections S-Video Input The S-Video port is capable of accepting signals from standard video sources. (e.g., cable/satellite boxes, DVD players, VCRs, etc.) Connect the S-Video port by the S-Video cable to input the video signal. S-Video cable is not included with this product Connect the L, R port by the white/red plug of the supplied AV cable to input the audio signal.
Preparations Connect cables.(Refer to the “Cable Connections” section for details). Press the POWER button to turn on the player. Select the TV signal mode, using the SOURCE button. Press the CH+/- buttons to skip channels. Or you can press the number buttons to input channels directly.
Page 17
Audio Menu ITEM DESCRIPTION Mode Set the audio mode as Custom/Standard/Theater/ Music/News. Treble/Bass/Balance Press the left/right direction button to adjust settings. When you select an audio Mode other than "Custom", these items are automatically given parameters to correspond with the chosen preset mode, so any change to these parameters would return the Mode setting to “Custom”...
Page 18
Settings Menu ITEM DESCRIPTION You are required to enter the 4-digit password to access this Parental option. The initial password is 0000. Controls Button Lock - This option would enable users to lock buttons on the unit panel. Block Unrated TV -The option would enable users to lock unrated TV program.
Page 19
Settings Menu ITEM DESCRIPTION Time This option would enable users to adjust Date/Time information as well as to setup the sleep timer. Date/Time - Enter this option, set "Mode" as "Auto" / "Custom". When Mode is set as "Auto", system would adjust date/time information automatically after you select a desired Time Zone.
The player’s AV input function would enable user to view programs from external signal sources. When input AV signals, read the user's manual of the external device as well. Connect the external AV signal source. Refer to the “Cable Connection” section for details Use the SOURCE button to select the relevant AV mode (AV, S-Video, Component, HDMI).
You can use the unit’s TFT LCD as your computer’s monitor. Shut down the unit and the computer, connect the VGA jack and PC Audio In jack. See the “Cable Connection” section. Turn on units and use the SOURCE button to select VGA System Setup Menu Various features can be preset through the setup menu, please read this section carefully.
Preparation After all necessary connections have been made, press POWER to turn on the player and then press the MODE button to select DVD. The following discs can be read by the player : DVD /CD / MP3 /JPEG. Disc Loading 1.
CD Playback The player will play all tracks on a CD disc by default. MP3 Playback Load a disc into the disc tray. It will start playback automatically. Or press direction buttons to select a fi le from the menu and press OK or PLAY/PAUSE button to start playback.
Start Playing Press PLAY/PAUSE to start playback Pause Playing Press PLAY/PAUSE once to hold playback, press it again to resume. Stop Playing Press STOP once to stop playback at a time point. (Pre-stop mode) It will resume from where it was stopped, when you press PLAY button.
Page 25
Slow Playback Slow Motion Press the SLOW button on the remote to have current playback advanced in a slow motion, repeatedly press this button to change speed as below. Step by Step Press Play/Pause to pause current playback, and then repeatedly press SLOW to have playback moved step by step forward.
Various features can be preset through the DVD setup menu. Press the DVD SETUP button to show the DVD menu. While working with the setup menu: Press the direction buttons to select the desired item. Press the right direction button or the OK button to confirm settings. To exit, press DVD SETUP again.
Page 27
Language Setup Item Instruction OSD Language Setup the OSD language. Audio Lang Setup the audio language. Subtitle Lang Setup the subtitle language. When OFF is selected, the subtitle will not be displayed. Menu Lang Setup the menu language. DVD Setup Default English English...
If you have a problem with this device, please read the troubleshooting guide section and check our website at www.cobyusa.com for Frequently Asked Questions (FAQs) and firmware updates. If these resources do not resolve the problem, please contact Technical Support. Symptom Check and Action •...
TFDVD 2425 Active Area TFT Panel Resolution Characteristic Display Color Pixel Pitch TV System TV Charactoristic Antenna Impedance Standby Power Consumption Power Consumption Standard Operating Temperature Range Wall Mounting TFDVD1995(S2) Active Area TFT Panel Resolution Characteristic Display Color Pixel Pitch TV System TV Charactoristic Antenna Impedance...
Page 30
TFDVD2295(S2) Active Area TFT Panel Resolution Characteristic Display Color Pixel Pitch TV System TV Charactoristic Antenna Impedance Standby Power Consumption Power Consumption Standard Operating Temperature Range Wall Mounting TFDVD1595(S3) Active Area TFT Panel Resolution Characteristic Display Color Pixel Pitch TV System TV Charactoristic Antenna Impedance Power Consumption...