1.4.1 Inspection Precautions ............. 3 2 Product description ................6 2.1 Product Overview ................ 6 2.2 Differences of DS810 & DS810 Plus ..........7 2.3 VCI Model for DS810 ..............9 2.4 VCI Model for DS810 Plus ............11 2.5 Host Model ................14 2.6 The Product Specifications ............
1 Statement You must carefully read the instruction manual, especially the safety instructions, before you can connect, commission and operate the products of IDUTEX TECHNOLOGY CO., LTD., Ltd. (hereinafter referred to as “IDUTEX”). 1.1 Agreement Once the product is used, it is an endorsement of the following:...
1.3 Disclaimer (1) This manual only provides the operation and operation methods for DS810 / DS810 Plus. The company does not assume any responsibility for the consequences caused by using the operation methods for other equipment operations.
1.4.1 Inspection Precautions (1) DS810 / DS810 Plus can only be connected to a safety outlet that is grounded. Before connecting, check and confirm that the diagnostic circuit is in good condition. Otherwise, it is not necessary to test to avoid damage to the main unit. If necessary, use a multimeter to measure the diagnostic seat voltage.
Page 7
with high temperature components such as the water tank and the exhaust pipe. At the same time, be careful of the voltage generated by the components such as the ignition coil, the distributor cover, the ignition circuit and the ignition plug during engine operation. 1.4.2 Notes on the use of the instrument (1) This instrument is a precision electronic instrument.
Page 8
a computer control system, the following should be noted: (1) Do not place magnetic objects such as radio speakers close to the computer, as the magnetic properties of the speakers can damage the circuits and components in the ECU. (2) When the ignition switch is turned on, the internal electrical equipment of the car must not be disconnected.
2 Product description 2.1 Product Overview DS810 / DS810 Plus is a proffessional efficient and convenient diagnistic tool for passenger car. Powerful quad-core Cortex-A53 2.0GHz processor with faster 2GB LPDDR4 and reliable 32GB On-board memory Android 10.0 OS running on 8.0 inch IPS Multi-touch capacitive touch screen ...
2.2 Differences of DS810 & DS810 Plus Differences DS810 DS810 Plus Small VCI Big VCI Connector OBDII OBDII + 11 OBD1 Connectors Service Reset Function Service Reset Function DS810 DS810 Plus OILREST ABS BLEEDING BATTERY INJECTOR THROTTLE TPMS IMMOKEYS AT SETTING...
Page 11
DOOR&WINDOWS LANGUAGE NOX SET PUMP START SEAT SET START&STOP TIRE SET TRANSPORT UREA SET 11 OBD1 Connectors for DS810 Plus: BMW-20 BENZ-14 GM/DAEWOO-12 KIA-20 MAZDA-17 NISSAN-14 FIAT-3 HONDA-3 VW/AUDI -2+2 MITSUBISHI HYUNDAI -12+16 Chrysler -12+8...
2.3 VCI Model for DS810 Name Description Power and Light on red & blue flashing: Power on and Bluetooth Bluetooth is disconnected ① connection Light on blue: Bluetooth is connected Indicator Light on blue flashing: communicating...
Page 13
VCI Box Parameters Processor ARM 32-bit Cortex processor Input Voltage DC 8-30V -10 to 70℃ ( 14-158℉ ) , relative Operating Temperature Humidity:<90% -30 to 120℃ ( -22-248℉ ) , relative Storage Temperature Humidity:<90% Communication model Bluetooth or USB 9141, ISO14230, ISO15765, ISO11898, SAE-J1850 VPW, SAE-1850...
2.4 VCI Model for DS810 Plus Name Description Power Indicator Lights up when powered(connected ① to the car) Vehicle ② communication Flashing When communicating indicator ③ Bluetooth indicator Lights up when connected to tablet ④ USB indicator Lights up when connected to tablet...
Page 15
Name Description Used for wired communication with ⑤ USB interface tablets ⑥ DC interface Power supply Name Description Main cable ⑦ Connect the OBDII main cable interface...
Page 16
VCI Box Parameters Processor ARM 32-bit Cortex processor Input Voltage DC 8-30V -10 to 70℃ ( 14-158℉ ) , relative Operating Temperature Humidity:<90% -30 to 120℃ ( -22-248℉ ) , relative Storage Temperature Humidity:<90% Communication model Bluetooth or USB 9141, ISO14230, ISO15765, ISO11898, SAE-J1850 VPW, SAE-1850...
2.5 Host Model 2.3-1 The front of host Name Description Power Indicator Lights on green when power on and the battery is higher than 20% Lights on red when power on and the ① battery is lower than 20% Lights on blue when it is charging Lights on green when it is full charge Communicaiton light...
Page 18
2.3-2 The top of host Name Description ③ DC Port DC power supply input port ④ USB Port USB Port ⑤ TF Port TF card port, Up to 32GB expand ⑥ Type-C Port Type-C port ⑦ HDMI Port High-Definition multimedia interface port ⑧...
2.3-3 The back of host Name Description ⑨ Camera Camera lens and camera flash 2.6 The Product Specifications Item Description Quad-core Cortex-A53 2.0GHz G52 3EE MC1@800MHz Operaton system Android 10. 0...
Page 20
32 GB EMMC 2G LPDDR4 Display 8.0 inch IPS Multi-touch Capacitive Touch Screen with 800*1280 resolution Camera(rear) 5.0 Megapixel, AF with Flashlight Connectivity WIFI: 802.11 b/g/n/ac Support Hot spot/ 2.4/5GHz BlueTooth 5.0, USB 2.0, Type-C HDMI: 1080P Output TF Card (Support up to 32GB) Audio Microphone Dual Speakers...
3 Product software introduction The software homepage show the functional module: Diagnosis, Hot Function, Quick Support, DTC Query, Update, Data Manager, Feedback, Settings. 3.1 Diagnosis Extensive vehicle coverage for more than 80 Europe, America, Asia, China and Australia vehicle makes.
3.4 Data Manager Here can manage the screenshot pictures, record video, vehicle software, testing report, data playback and function list. 3.5 Quick Support Remote technical support via Teamviewer QuickSupport.
3.7 Feedback This function allows you upload vehicle diagnostics problems encountered by users during the use of the software. It can help engineers repair software errors quickly.
(4) The activation request sent, your mailbox has received the activation link. (5) Log in to the mailbox where you just filled in the activation information and click the activation link to complete the activation. 5 Cleaning and maintenance and warranty 5.1 Cleaning and maintenance (1) Do not disassemble it, try to handle it gently to avoid impact.
5.2 Warranty This applies only to products purchased from a product dealer that has been authorized by IDUTEX. If products are purchased from anyone other than a IDUTEX authorized product dealer, buyers will be solely responsible for the cost of product maintenance services...
Page 41
IDUTEX . (1) Product acceptance When you receive the product, please be sure to open the package check. Please carefully check the product category and quantity according to the attached list. If there are any shortages, errors, damages and other unpredictable abnormal conditions, please keep all the documents of the product and notify us immediately.
Page 42
A. Failures, defects or flaws not directly related to the quality of the IDUTEX products, including but not limited to failing to use the product according to the user manual’s instructions, crash, fall, disassemble by anyone other than a IDUTEX approved service person, connecting improper accessories, damage owing to impact because of improper transport or storage of the product, etc.
Page 43
name, model number, serial number and purchase date of the product should be clearly stated on the invoice. It is covered with the official seal of the dealer. (6) Over-warranty product maintenance regulations If the product needs to be repaired by our company after the maintenance period, we will charge the maintenance fee appropriately, and the freight will be borne by the user.