Philips VTR8210 User Manual page 68

18.4.2 TV Mode
TV Mode has two options: NTSC and PAL. When the device
is linked to TV, the correct option is selected based on the
TV mode.
18.4.3 Default Settings
This allows the user to reset the parameters of the device.
18.4.4 LCD Brightness
This allows the user to adjust the LCD to the required
brightness. The LCD brightness has three levels: High,
Medium and Low. Press the "
select the desired level. After selecting the level, press the
OK button to confirm, or press the Back button to return to
the previous menu.
18.4.5 VTR8210, System Time
The System Time interface is illustrated below:
EN
68
" or " " button to
System time
2017/09/01 16:30
On the interface, press" " or "
the current time. Press " Menu" to select Year, Month, Day;
and press " " or " " to change these value.
18.4.6 Auto Off
If the user does not perform an operation on the device over
a pre-set time, the system automatically shuts down. See the
auto off setting interface reference below:
Auto off
Off
1 Min
2 Min
3 Min
" and "Menu " to set
Auto off
5 Min