7 Voice Recording
Please note the instructions in this section when you make
the first voice recording with your Video Tracer!
1 On the preview interface, press the "Voice Record" button
to start recording. The status indicator turns yellow.
Please rotate the built-in microphone toward the source of
sound.
2 Press the "
" button to mark the file as an important
document, so the file will not be deleted by loop recording.
3 Long press "Video Record" button to switch to video
recording mode.
4 Press the "Record" button to end recording. The device
returns to the Preview interface.
Illustration of Recording Interface:
R
1
00:00:01
2
Record state
1
3
Current recording time
2
EN
52
3
Status of the battery
Note
Prior to recording, please preset the type of recording
•
you need.
Please delete any unnecessary files before recording.
•
Make a test recording to make sure that the Video Tracer
•
settings are correct.
When recording, please do not remove the card or the
•
recorded file may be damaged.
When recording, VTR8210 please do not cut off the
•
power supply or the Video Tracer will fail; loss or damage
to recorded files may occur.
If the recorder needs to be used for a long time, please
•
charge the device before recording.