Installation; Mounting Options - Honeywell Notifier NFS2-3030 Product Installation Document

When using a HS-NCM as a repeater, refer to the following for installation limitations
Network Node
HS-NCM with
software
Wire
v31.x v30.x or V20.x
Network Node
HS-NCM with
software
v31.x v30.x or v20.x
Wire
Network Node
HS-NCM with
software
v31.x v30.x or v20.x
Fiber
Network Node
HS-NCM with
software
v31.x or v30.x
Wire or
Fiber
Network Node
HS-NCM with
software
v31.x v30.0 or v20.x
Wire
Network Node
HS-NCM with
software
v20.x
Fiber
Refer to the High-Speed Noti•Fire•Net Instruction Manual for network configurations using the HS-NCM as a repeater.

6 Installation

6.1 Mounting Options

The HS-NCM is designed to mount in a variety of CAB-3/CAB-4 and CAB-5 compatible chassis, in the NFS-320 and the N16E enclosure, on a BMP-
1 blank plate for dress panel mounting, or behind the DVC-EM in the CA-1 or CA-2 audio chassis. HS-NCM-W can be door-mounted; HS-NCM-MF,
HS-NCM-SF, HS-NCM-WMF, HS-NCM-WSF, or HS-NCM-MFSF must be installed in a stationary location. Recommended location is in the top
row under the back-box's knockout, so as to avoid over-bending fiber-optic cable. Avoid mounting other option boards in front of HS-NCM so that its
LEDs are visible. Attach the HS-NCM using the four screws that ship with it.
Cabinet-mounting HS-NCM-W/HS-NCM-MF/HS-NCM-SF/HS-NCM-WMF/HS-NCM-WSF/HS-NCM-MFSF:
• CHS-4L/4N, CHS2-M3, CHS-M3, the NFS2-640 chassis or NFS-320 enclosure: Mount the HS-NCM in standard option module positions as
described in your control panel installation manual. Figure 8 shows CHS-4L as an example.
• CA-1, CA-2: Mount the HS-NCM-W/MF/SF behind a DVC-EM in either the CA-1 or CA-2 audio chassis. Figure 9 illustrates how to install it in
a CA-1. Mounting is the same behind a DVC-EM in the lower half-chassis of a CA-2.
NOTE: When mounting wire or fiber versions of the HS-NCM using the CHS-RL-MP chassis, refer to the CHS-RL-MP Product Installation
Document.
Door-mounting HS-NCM-W:
• Door-mount on the ADP-4B Dress Panel on a single-space blank plate (BMP-1) for mounting in a CAB-4 series backbox, as described in Figure
10.
HS-NCM Installation Document — P/N 54014:C1 12/15/2020
HS-NCM
Network Node
Repeater
HS-NCM with
with SW
v20.x
Wire v31.x v30.x or v20.x
v30.x or
v31.x
HS-NCM
Network Node
Repeater
HS-NCM with
with
software
v31.x v30.x or v20.x
Fiber
v20.x
HS-NCM
Network Node
Repeater
HS-NCM with
with
software v31.x V30.x
software
Fiber
v20.x
HS-NCM
Network Node
Repeater
HS-NCM with
with
software
v31.x or v30.x
Wire or
v31.x or
Fiber
v30.x
HS-NCM
Network Node
Repeater
HS-NCM with
with
software
Fiber
v31.x or
v30.x
HS-NCM
Network Node
Repeater
HS-NCM with
with
software
Fiber
v31.x or
v30.x
Figure 7 HS-NCM Repeater Installation Limitations
software
software
or v20.x
software
software
v20.x
software
v20.x
LEGEND:
Acceptable Installation
Unacceptable Installation
9