Table of Contents
Advertisement
1.
GENERAL SAFETY INFORMATION
1.1
Pressurized Devices
• This equipment is a pressure-containing device.
• Do not exceed maximum operating pressure as shown on the
equipment serial number tag.
• Verify that equipment is fully de-pressurized before performing
service or maintenance functions.
1.2
Electrical:
• This equipment requires electricity to operate.
• Install equipment in compliance with national and local electrical
codes.
• Standard equipment is supplied with NEMA 4,4X electrical
enclosures and is not intended for installation in hazardous
environments.
• Disconnect power supply to equipment when performing any
electrical service work.
1.3
Breathing Air:
• Air treated by this equipment may not be suitable for breathing
without further purification.
• Refer to OSHA standard 1910.134 for the requirements for
breathing quality air.
1.4
Noise:
CAUTION: Do not operate dryer without mufflers
installed.
1.5
High Velocity Air:
CAUTION: Do not stand near mufflers during tower
depressurization.
2.
RECEIVING, MOVING, UNPACKING
2.1
Receiving:
• This shipment has been thoroughly checked, packed and
inspected before leaving our plant.
• It was received in good condition by the carrier and was so
acknowledged.
• Check for visible loss or damage. If this shipment shows evidence
of loss or damage at time of delivery to you, insist that the carrier's
agent make a notation of this loss or damage on the delivery
receipt.
2.2
Moving:
CAUTION: Use lifting lugs or forklift. Do not lift equipment
by piping.
2.3
Unpacking:
• Check for concealed loss or damage. When a shipment has been
delivered to you in apparent good order, but concealed damage
is found upon unpacking, notify the carrier immediately and insist
that his agent inspects the shipment.
• Fifteen days from receipt of shipment is the maximum time limit
for requesting such inspection.
• Concealed damage claims are not our responsibility as our terms
are F.O.B. point of shipment.
— 1 —
Hide quick links:
Advertisement
Table of Contents
