Table of Contents
Advertisement
10/22/2016
9.8 Quartz Heater
TOP PREVIOUS NEXT
1. Remove the sensor cable from the DPC connector CN7.
2. Remove the exhaust guide A by removing the two screws shown in figure 10.
3. Disconnect the cables to the grill heater
4. Remove the grill cover by removing the 5 screws in figure 11
5. Remove the two screws holding the grill heater (Figure12).
6. Loosen the 2 screws holding the ceramic grill holders, turn the holders to release the grill element.
7. Remove the heater bracket D by using a flat blade screw driver to lever back the tabs.
8. The grill element can now be removed from inside the oven.
file:///C:/Users/sh.dehghani/Desktop/NNA873,813_ABEUSVC_MOP0307006C2/viewing/SGML_VIEW_DATA/EU/NNA813AB/SVC/s0908000000.html#9.8
s0908000000.html
Figure 10
Removing the exhaust guide and grill cover
Figure 11
1/2
Advertisement
Table of Contents
