EAntenna 5070OWA8 Manual page 4

Para montar el BOOM, tiene que hacer coincidir frontalmente las partes de boom que tienen la misma letra ( p.ej: A-A, B-B, C-C etc), y una
vez hecho, las placas (EA010039) se van fijando con los tornillos DIN 933 M6X16 y arandela DIN 9021 M6. Se recomienda poner todas los
tornillos y arandelas antes de fijarla a tope para no dañar ninguna rosca del BOOM.
BOOM
BOOM
To mount the BOOM, you have to match frontally boom parts with the same letter (eg: AA, BB, CC etc), and once done, the plates
(EA010039) go with fixing screws DIN 933 M6X16 and washer DIN 9021 M6. It is recommended to put all of the screws with washers in first,
with all in the start with tightening the screws. This avoid damaging the threads in the Boom.
BOOM
BOOM
(EA010039)
(EA010039)
DIN 933 M6X16
DIN 9021 M6
(EA010039)
(EA010039)
DIN 933 M6X16
DIN 9021 M6
(EA010039)
A A
(EA010039)
A A
ESPAÑOL
ENGLISH