LENCO LS-410 User Manual page 17

Main Power Connection
1. Insert the DC plug of the AC adapter cord into the DC INPUT Jack at
the back of the turntable.
2. Plug the AC adapter into a normal power outlet.
NOTE: Do not plug the AC power adapter into a power outlet before
all turntable assembly is completed. Before turning on turntable
power, recheck all connections to make sure they are correct and
secure. Always turn off the turntable before connecting or
disconnecting from power.
Power Management Function
The turntable will automatically power off after 20 minutes of
inactivity.
The indicator light will turn off.
To resume operation, press the ON/OFF button again.
Playing a Record
1. Before playing a record
1.1 Pull the protector straight forward to remove it.
NOTE: Applying a downward force may
cause the stylus to come off the body.
Only low volume is output if the stylus
has come off, or is about to come off,
so refer to "Replacing the stylus" to
reattach the stylus correctly.
1.2 Place the record on the felt mat so that the center hole aligns with
the spindle.
16