Leds; Chapter 1: Valet - Cisco Valet M10 User Manual

UserGuide

Chapter 1: Valet

ThankyouforchoosingaCiscoValetwirelesshotspot .ThisQuickReferenceGuidecoversboththeValetandValetPlusmodels .
ValetwillbeusedasageneralreferencetobothmodelsandalldetailsinthisQuickReferenceGuideapplytobothmodels
unlessValetPlusisnoted .
Top

LEDs

(1-4) light up once the Valet is connected
to a device using a network (Ethernet) cable . The
LED flashes when there is activity over that port . 
Valet Plus lights up green when connected to a device
at gigabit speed or blue when connected to a device at
10/100speed .
Wi-Fi Protected Setup
The
usedifyouusetheEasySetupKeytoconnectdevicesto
yournetwork .
Ifyouhaveclientdevices,suchaswirelessadapters,that
supportWi-FiProtectedSetup™,thenyoucanusetheWi-Fi
ProtectedSetupbuttontoautomaticallyconfigurewireless
securityforyourwirelessnetwork(s) .
To use Wi-Fi Protected Setup, refer to "Wi-Fi Protected
Setup"onpage21 .
Button doesn't need to be
Power LED lights up when the Valet
The
ispoweredon .Itisnormalforthistoflash
duringstartup .
The Internet LED lights up when connected
to the Internet and flashes to indicate activity . 
Valet Plus lights up green when connected to a
deviceatgigabitspeedorbluewhenconnectedto
adeviceat10/100speed .
LEDlightsupwhenwirelessison .It
TheWireless
flasheswhentheValetsendsorreceivesdataover
thewirelessnetwork .
Chapter1:Valet
1