Front Panel Leds - Cisco Catalyst IR1800 Rugged Series Installation Manual

Product Overview

Front Panel LEDs

The following graphic shows the locations and descriptions of the LEDs.
Table 5: LED Descriptions
LED Description
Number
1 Ignition Status
2 System Status
3 and 4 Digital I/O
5 GNSS Module
6 SSD Module
LED Status
Off - Ignition Power Management is disabled when SYS LED is on.
Steady Green combined with SYS LED Off - Ignition signal is off
(power management is enabled)
Steady Green combined with SYS LED On - Ignition signal is on.
Flashing Green - Ignition Off - Timer counts down when SYS LED is
on.
Steady Yellow - Ignition power management feature is not loaded.
Steady Green - Operational
Flashing Green - IOS-XE Booting
Steady Yellow - System in ROMMOM Mode
Off - No Power
Off - Inactive
Steady Yellow - Active
Steady Green - GNSS/DR configured, location fix achieved
Flashing Green - GNSS/DR Active, trying to achieve location fix
Off - GNSS/DR not configured
Steady Green - SSD being accessed
Off - No power or not enabled
Cisco Catalyst IR1800 Rugged Series Router Hardware Installation Guide
Front Panel LEDs
19