Cisco Valet Connector AM10 User Manual page 7

WindowsVista
AfteryouhaveinstalledtheValetConnector,theWireless
Network Configuration utility icon appears on your
computer'ssystemtray.
WirelessNetworkConfigurationUtilityIcon
Whenyourmousepointerhoversovertheicon,thestatus
informationofyourwirelessconnectionappears.
WirelessConnectionStatus
NewWirelessConnection
Toconnecttoadifferentwirelessnetwork:
1. Right-click the Wireless Network Configuration 
utilityicon.
2. ClickConnect to a network.
UtilityMenu
Chapter3:WirelessNetworkConfiguration
3. Selectyournetwork,andthenclickConnect.
SelectNetwork
4. Ifyournetworkuseswirelesssecurity,gotostep5.
If your network does not use wireless security, this
screenappears.Toconnecttoyourunsecurednetwork,
clickConnect Anywayandgotostep7.
UnsecuredNetwork
5. Enterthesecuritykey,WiredEquivalentPrivacy(WEP)
key,orWi-FiProtectedAccess(WPA/WPA2)passphrase
(alsoknownasapre-sharedkey),dependingonyour
typeofsecurity.ClickConnect.
SecuredNetwork
5