Download
Share
Print this page
  1. Manuals
  2. Brands
  3. QWNET Manuals
  4. Wireless Access Point
  5. CPE5450FIT
  6. Quick start manual

QWNET CPE5450FIT Quick Start Manual

Hide thumbs Also See for CPE5450FIT:

Advertisement

Quick Links

Download this manual
CPE5450FIT Quick Start Guide
Ver1.0
Aug， 2019
Packing list
 
Product pictures
1 

Advertisement

loading

Related Manuals for QWNET CPE5450FIT

Summary of Contents for QWNET CPE5450FIT

  • Page 1 CPE5450FIT Quick Start Guide Ver1.0 Aug， 2019 Packing list   Product pictures 1 ...
  • Page 2 H CPE (Host CPE)C CPE (Client CPE) 1.Preparation for installation: 1-0 Shake the devices (CPE5450FIT) separately, to check if the device is damaged from shipment, if you can hear some noise from inside of the device, and you suspect it maybe PCBA board loosened, please contact us, we will help check if you need a replacement.
  • Page 3 1-1 Move front cover 1-1-1 Push and then pull the front cover out 1-1-2 1-2Application case 1 CPEs work with your router, to extend Wi-Fi signal, (e.g.from A building to B Building) 3 ...
  • Page 4 1-2-1 Ensure you know the CPE kit are ready for installation This step is to verify wireless connection between both CPE5450FIT (both Host and Client), to make sure they are pre-configured and can talk each other, It also helps you to be familiar with the product and prevent any defectiveitem caused by delivery or by other reason etc.
  • Page 5 1-2-1-2 Use Ethernet cable to connect WAN port of CPE5450FITHost to LAN port of Wi-Fi Router 1-2-1-3 Use Ethernet cable to connect POE port of power adapter to WAN port of CPE5450FITClient 1-2-1-4 Use Ethernet cable to connect LAN port of CPE5450FITClient to computer 5 ...
  • Page 6 1-2-1-5 Set range between CPE5450FITHost and CPE5450FITClient : 3 meters(around 10 feet) is recommended, without obstacle between 2 CPEs 1-2-1-6 Turn on all equipment, especially check as below to see if 2 CPE5450FIT are turning on, wait for 1 minute...
  • Page 7 You could find IP of router on label (normally located on bottom of the router), following example is for your reference Following is 192.168.1.1 , Win7 OS for example. A. Click “Windows” icon B. Input command “ping 192.168.1.1 –t” C. Click “enter” to Ping 192.168.1.1 –t Following messages indicates the CPE5450FIT devices are working well. 7 ...
  • Page 8   1-2-2 The default password for the device is : 66666666 1-2-3 IP address for both Host(H) CPE and Client (C) CPE5450FITare: 192.168.188.253, you could log into the device via page to change SSID and password of the device. 1-2-3 Changing SSID and password 1‐2‐3‐1 Changing Host（H） ...
  • Page 9 3） Change adapter settings 4）Local Area Connection 5）Right Click and Select Properties 9 ...
  • Page 10 6）Select Internet Protocol Version 4 (TCP IPV4)， try IPV6 if it doesn’t work. 7) Select Properties 10 ...
  • Page 11 8)Select Use the following IP address 9)Input IP address 192.168.188.xx (“xx” is between 0~251,e.g.22) 11 ...
  • Page 12 10) Left Click to automatically input Subnet mask:255.255.255.0 11) Subnet Mask 255.255.255.0 12 ...
  • Page 13 12) Click OK 13) Click Close 14) Login CPE5450FIT Host’s Webpage, use IE or Firefox browser is recommended. Input IP address:192.168.188.253 15) Input Password: admin 13 ...
  • Page 14       Click Login and 1-2-3-1-2 ‐Click Wi‐Fi Settings      1‐2‐3‐1‐3 ‐Change SSID and password 14 ...
  • Page 15 1‐2‐3‐2 Changing Client（C）  CPE’s SSID and Password  Step 1‐Power off Host (H) CPE  Step 2‐Click Wi‐Fi Settings    Step 3‐Change SSID and password      15 ...

  • Page 16: Application Case

    1-2-1 (from step 1-2-1-1 to 1-2-1-8)    1-3-2If you don’t have a router, please use a computer to check according to following procedure. Sketch Diagram Test Equipment List: CPE5450FIT 2pcs Computer (Laptop)1 set POE Power Adapter 2pcs(Ethernet Cable Length:<60M, or 194ft)
  • Page 17 1-3-2-3 Set range between CPE5450FITHost and CPE5450FITClient: 3 meters(around 10 feet) is recommended, without obstacle between 2 CPEs : 1-3-2-4 Turn on all equipment, especially check as below to see if 2 CPE5450FIT are turning on, wait for 1 minute...
  • Page 18 1-3-2-5 Light information Normal lights are as followings: 1-3-2-6 Set IPv4 IP address or IPv6 IP address of the PC to “192.168.188.22”(or 192.168.188.11 etc.), Please refer to above step 1-2-3-1 (from step 1 to 16) , and Click Login AP BSSID will be a MAC address, and there will be a green tick. “V”. It shows the CPE devices are working ok. Otherwise it will be a red mark”...
  • Page 19 Equipment: CPE5450FIT1 pair (2PCS) Camera 1pcs DVR/NVR1pcs Ethernet Cable 4pcs 1-4-1 Use Ethernet cable to connect WAN port of CPE5450FIT Clientto IP camera 1-4-2 Use Ethernet cable to connect LAN port of CPE5450FITClient to POE port of power adapter 19 ...
  • Page 20 1-4-4 Use Ethernet cable to connect WAN port of CPE5450FITHost to NVR/DVR     1-4-5 Turn on all equipment, especially check as below to see if 2 CPE5450FIT are turning on, wait for 1 minute, then you could see video of camera on monitor Light is on Light is not on 20 ...
  • Page 21 1-4-6 Installation tips: 21 ...
  • Page 22 Application Case 3 CPEs are used in wireless video transmission with more than 2camera(s): (e.g.3 cameras) Sketch diagram 2-1 Use Ethernet cable to connect switch to IP cameras 2-2 Use Ethernet cable to connect switch to CPE5450FITClient (C) 2-3 Use Ethernet cable to connect LAN port of CPE5450FITHost (H) to POE port of power adapter 2-4 Use Ethernet cable to connect WAN port of CPE5450FITHost (H) to NVR/DVR 2-5 Turn on all equipment, wait for 1 minute, then you could see video of camera on monitor 22 ...
  • Page 23 3. Use metal hoop with screw fastening to fasten the device 23 ...