Related Manuals for QWNET CPE5450
Summary of Contents for QWNET CPE5450
- Page 1 CPE5450 Quick Start Guide Ver1.2 Jul， 2017 Packing list 1. CPE5450 2pcs 2. POE Power Adapter 2pcs 3.Ethernet Cable 4pcs(2pcs for spare use) 4. Metal Hoop with Screw Fastening 2pcs Product pictures...
-
Page 2: Preparation For Installation
M CPE (Master CPE) 1.Preparation for installation: 1-0 Shake the devices (CPE5450) separately, to check if the device is damaged from shipment, if you can hear some noise from inside of the device, and you suspect it maybe PCBA board loosened, please contact us, we will help check if you need a replacement. - Page 3 1-2 Ensure you know the CPE kit are ready for installation This step is to verify wireless connection between 2 CPE5450, to make sure they can talk each other, It also helps user to be familiar with the product and prevent any defective item caused by delivery etc. You just need to execute either step 1-2-1 or step 1-2-2.
- Page 4 1-2-1-3 Use Ethernet cable to connect POE port of power adapter to WAN port of CPE5450 (2#) 1-2-1-4 Use Ethernet cable to connect LAN port of CPE5450(2#) to PC 1-2-1-5 Set range between CPE5450 1# and CPE5450 2# : 3 meters is recommended, without obstacle between 2 CPEs...
- Page 5 1-2-1-6 Turn on all equipment, especially check as below to see if 2 CPE5450 are turning on, wait for 1 minute Light is on Light is not on 1-2-1-7 Ping IP address of the Wi-Fi router (some is:192.168.1.1 or 192.168.0.1) on the PC...
- Page 6 A. Click “Windows” icon B. Input command “ping 192.168.1.1 –t” C. Click “enter” to Ping 192.168.1.1 –t Following messages indicates the CPE5450 devices are working well. And you don’t need to execute step 1-2-2. You could proceed to execute step 2-1 instead.
- Page 7 2-1. Sketch Diagram Equipment: CPE5450 Slave (in S mode) 1pcs CPE5450 Master (in M mode) 1pcs PC (Notebook) 1 set POE Power Adapter 2pcs Ethernet Cable 3pcs 1-2-2-1 Connect CPE5450 Slave to PC and power adapter as following:...
- Page 8 1-2-2-2 Connect CPE5450 Master to power adapter as following: 1-2-2-3 Set range between CPE5450 Slave and CPE5450 Master : 3 meters(around 10 foot) is recommended, without obstacle between 2 CPEs :...
- Page 9 1-2-2-4 Turn on all equipment, especially check as below to see if 2 CPE5450 are turning on, wait for 1 minute Light is on Light is not on 1-2-2-5 Set IPv4 IP address or IPv6 IP address of the PC to “192.168.188.22”(or 192.168.188.11 etc.),...
- Page 10 1-2-2-6 Typing 192.168.188.253 on browser of the PC, Firefox, IE browser are recommended. To log into CPE Slave’s page. Enter User name: admin , Password: admin If you can see Master’s MAC address , and signal strength(like -46dBm) as below, it means the devices are talking to each other, they are working well.
- Page 11 1 pair (2PCS) Camera 1pcs DVR/NVR 1pcs Ethernet Cable 4pcs 2-1-1 Use Ethernet cable to connect WAN port of CPE5450 1# to IP camera 2-1-2 Use Ethernet cable to connect LAN port of CPE5450 1# to POE port of power adapter...
- Page 12 2-1-3 Use Ethernet cable to connect LAN port of CPE5450 2# to POE port of power adapter 2-1-4 Use Ethernet cable to connect WAN port of CPE5450 2# to NVR/DVR...
- Page 13 2-1-5 Turn on all equipment, especially check as below to see if 2 CPE5450 are turning on, wait for 1 minute, then you could see video of camera on monitor Light is on Light is not on 2-1-6 Installation tips:...
- Page 14 2-2-2 The default password for the device is : 66666666 2-2-3 IP address for another CPE, M (Master) CPE5450 is: 192.168.188.252, and IP address for S(Slave) CPE5450 is :192.168.188.253, so you could log into the device via page to change SSID and password of the device.
- Page 15 Warning: Do not push “Reset” button of CPE4540 , if you keep pushing “Reset” button for longer than 15 seconds, the devices will not maintain connection between 2 CPEs, and then they need to be re-configured. If you push “Reset”button one time (not longer than 5 seconds), it may cause 3 minutes to 5 minutes transmission issue (not stable) , but it will resume by itself.
- Page 16 3. Use metal hoop with screw fastening to fasten the device...