Figure 17
1. Screw
2. Lift-lock lever
3. Spring washer
4. Spacer
4. Insert the lift-lock lever assembly screw into the
control-panel hole and secure it with a locknut.
Position the lift-lock lever as shown in
5. Affix the lift-lock lever decal to the control panel as
shown in
Figure
17.
6. Secure the control panel to machine, with the screws
previously removed.
7. To operate the lift-lock lever, rotate it under the front
edge of the lift switch to prevent the switch from being
activated.
5. Flat washer
6. Decal
7. Locknut
Figure
17.
11