4. Insert the lock assembly and washer into the hole on
the hood and secure it underneath with the nut
15).
Note: Ensure that the lock is correctly oriented.
Figure 15
1. Decal 106-6754
2. Nut
5. Apply the decal to the hood next to the latch
15).
6. Attach the hood-lock key to the ignition key with the
key ring provided.
(Figure
3. Washer
4. Lock assembly
(Figure
5
Installing the Lift-Lock Lever
Parts needed for this procedure:
1
Lift-lock lever
1
Flat washer
1
Spring washer
1
Spacer
1
Screw (1/4 x 1 inch)
1
Flange locknut (1/4 inch)
Procedure
1. Carefully locate and puncture the control-panel decal,
in front of the lift switch, to expose the mounting hole
for the lift-lock lever
1. Mounting screw (4)
2. Control panel
2. Remove the 4 screws securing the control panel to the
machine
(Figure
3. Insert the lift-lock lever, spacer, wave washer, and
flat washer onto the 1/4 x 1 inch pan-head screw
positioning as shown in
10
(Figure
16).
Figure 16
3. Mounting hole
16).
Figure
17.