Bagging The Clippings; Side-Discharging The Clippings - Toro 21761 Operator's Manual

Bagging the Clippings

Use the grass bag when you want to collect grass and leaf clippings from the lawn.
If the side-discharge chute is on the machine, remove it; refer to
Installing the Grass Bag
1. Raise and hold up the rear deflector (A of
2. Install the grass bag, ensuring that the pins on the bag rest in the notches on the handle (B of
3. Lower the rear deflector.
Removing the Grass Bag
To remove the bag, reverse the steps in
Side-Discharging the
Clippings
Use side-discharging for cutting very tall grass.
If the grass bag is on the machine, remove it before
side-discharging the clippings; refer to
Grass Bag (page 12).
Installing the Side-Discharge
Chute
Unlatch and lift up the side deflector and install the
side-discharge chute (Figure
Figure
Figure 15
Installing the Grass Bag (page
Removing the
16).
Removing the Side-Discharge Chute (page
15).
12).
Removing the Side-Discharge
Chute
To remove the side-discharge chute, lift up the side
deflector, remove the side-discharge chute, and lower
the side-discharge deflector until it latches securely.
12
Figure
Figure 16
12).
15).
g235812
g235646