Related Manuals for Charnwood FIREPIT
Summary of Contents for Charnwood FIREPIT
-
Page 1: Installation Instructions
CHARNWOOD COUNTRY 4 Operating Installation Instructions Bishops Way, Newport, Isle Of Wight, PO3O 5WS, U.K. Tel: (01983) 527552 Fax: (01983) 821267 Internet: www.charnwood.com Email: charnwood@ajwells.co.uk... - Page 2 CHARNWOOD COUNTRY 4 OPERATING INSTRUCTIONS Before lighting the stove check with the installer that the work and checks described in the Installation Instructions have been carried out correctly and that the chimney has been swept, is sound and free from any obstructions.
- Page 3 To make ash removal easier, when burning coal or smokeless fuel, there is a special Charnwood ash carrier available. This enables the whole ashpan to be placed in the sealed carrier and taken outside. These may...
-
Page 4: Chimney Sweeping
to the desired setting. CLEANING AND MAINTENANCE The stove is finished with a high temperature paint which will withstand the temperatures encountered in normal use. This may be cleaned with a damp lint-free cloth when the stove is cold. Should re-painting become necessary, high temperature paints are available from your supplier or from stove shops. - Page 5 Fume Emission. Warning Note: Properly installed and operated this appliance will not emit fumes. Occasional fume from de-ashing and re-fuelling may occur. Persistent fume emission is potentially dangerous and must not be tolerated. If fume emission does persist, then the following immediate actions should be taken: a) Open doors and windows to ventilate the room.
-
Page 6: Hearth And Fire Surround
125mm (5") i/d pipe. This may be stainless steel, cast iron, or thick wall steel pipe. Straight lengths of Charnwood Pipe to match the stove are available if required. There are several ways of connecting the stove to the flue. These are illustrated in Figs. -
Page 7: Soot Doors
kept to a minimum and should not be more than 125mm (5 inches) long. The sealing face of the flue collar must be coated with fire cement before fixing to the body of the stove using the two screws provided. The blanking plate must be removed, sealed with fire cement and refitted, care being taken to ensure that the... - Page 8 Overall Dimensions (All dimensions are in mm) Page 8 Country 4 7/98 b...