Advertisement
Quick Links
Advertisement
Related Manuals for THOR TEC Series
Summary of Contents for THOR TEC Series
- Page 1 COOK LIKE USE AND CARE MANUAL...
- Page 2 USE AND CARE MANUAL PROFESSIONAL ELECTRIC COOKTOPS TEC MODELS TEC36 TEC30...
- Page 3 THOR KITCHEN PROFESSIONAL ELECTRIC COOKTOP Model:TEC30 Model:TEC36...
-
Page 4: Table Of Contents
Table of Contents General safety regulations-------------------------------------------1 Instructions for built-in-------------------------------------------------4 Installing the cooktop--------------------------------------------------6 Cooktop Features------------------------------------------------------8 Cleaning and maintenance-----------------------------------------11 Use of Cookware-----------------------------------------------------12 Trouble shooting------------------------------------------------------13 Warranty----------------------------------------------------------------14... -
Page 5: General Safety Regulations
General safety regulations IMPORTANT SAFETY INFORMATION. READ ALL INSTRUCTIONS BEFORE USING. WARNING Read all safety instructions before using the product. Failure to follow these instructions may result in fire, electrical shock, serious injury or death. WARNING GENERAL SAFETY INSTRUCTIONS Use this cooktop only for its intended purpose as described in this Owner's Manual. ... - Page 6 WARNING COOKTOP SAFETY INSTRUCTIONS In the event of a fire, do not use water or grease on fires. Never pick up a flaming pan. Turn the controls off. Smother a flaming pan on a surface unit by covering the pan completely with a well-fitted lid, cookie sheet or flat tray.
- Page 7 result in ignition of clothing. Proper relationship of utensil to burner will also improve efficiency. Make sure reflector pans or drip bowls are in place – absence of these pans or make sure reflector pans or drip bowls are in place – absence of these pans or bowls during cooking may subject wiring or components underneath to damage.
-
Page 8: Instructions For Built
Instructions for built-in Cut out the work surface according to the sizes shown in the following drawing. Note: Before carving, check that the dimensions indicated correspond to the dimensions of the product. Be sure the thickness of the work surface is at least 1.18inch.Choose a heat-resistant work ... - Page 9 Ventilation and safety distances Make absolutely sure that the following conditions are met for adequate ventilation of the cooktop and that the supply and exhaust air is not blocked: Note: The safety distance between the cooktop and the cabinet or the cooker hood should be at ...
-
Page 10: Installing The Cooktop
Installing the cooktop The cooktop must connect to a separate, grounded wire, single phase, AC Only electrical supply with their own circuit breaker. These appliances must be installed in accordance with National Electrical Codes, as well as all state, municipal and local codes. This appliance must be supplied with the proper voltage and frequency and amperage, which is protected by a properly sized circuit breaker or time delay fuse. - Page 11 Commissioning the cooktop The electric cooktop must be installed by qualified installer. Do not place cooktop next to open fires, heaters or other sources of heat. Make sure that the mains connection cable is not damaged or squashed beneath the cooktop ...
-
Page 12: Cooktop Features
Cooktop Features Throughout this manual, features and appearance may vary from your model. TEC30 TEC36 Operating the cooktop Place suitable cookware onto the cooktop, and connect the plug to suitable socket. The operation of both zones is the same. Caution! Make no hot pots or pans on the control board! - Page 13 Power Press the On / Off button for three seconds. You will hear a beep and see flashing lines -- on the display next to every cooking zone. If you have not selected a program within about 30 seconds, the unit will return to standby. Burner Press the button for the...
- Page 14 Residual heat indicator When the cooktop has been operating for some time, there will be some residual heat. The residual heat indicator warns for each cooking zone separately with "H" symbol. Timer After you have selected the power press the timer key Timer confirmation With repeated pressing onto timer key choose the zones you want to set as the LED light showing.
-
Page 15: Cleaning And Maintenance
Cleaning and maintenance Disconnect plug and wait until the unit is cooled down completely. If the pots/pans are used without being cleaned, discoloration or cooked on stains may occur. Do not use benzene, thinner, scrubbing brush or polishing powder to clean the cooker. ... -
Page 16: Use Of Cookware
Cookware for radiant glass cooktop The following information will help you choose cookware which will give good performance on glass cooktops. Stainless Steel: recommended Stain the cooktop if not removed immediately. Aluminium: heavy weight recommended Porcelain Enamel on Cast Iron: recommended if Good conductivity. -
Page 17: Trouble Shooting
Trouble Shooting If you encounter a problem, it often will merely be something minor. Before you call customer service, review the charts on the following pages first and you may not to call for service. If an error occurs in the control operation, a fault code will flash in the display .Record the error code and call for service. -
Page 18: Warranty
Warranty This product has been manufactured by Thor Group, 4651 E Airport Drive, California 91761 For Customer Service, please call (877) 288 - 8099 For the most up to date warranty and service policy, please refer to our website WWW.THORKITCHEN.COM/WARRANTY-REGISTRATION For in-warranty service requests, please visit our website at WWW.THORKITCHEN.COM/SERVICE... - Page 19 WELCOME TO THE CLUB You chose THOR Kitchen to enhance your culinary journey and we’re stoked to have you in the club. Think of it as a secret society of really savvy people, such as yourself, choosing professional power and performance at an affordable price.
Need help?
Do you have a question about the TEC Series and is the answer not in the manual?
Questions and answers