Page 1
325 SVD PERSONAL SAFETY VOLTAGE DETECTOR INSTRUCTION MANUAL...
Page 2
INDEX PAGE INTRODUCTION ......FEATURES ........SPECIFICATION ......METHOD OF USE ......CLEANING & REPLACING BATTERY ....CAUTIONS ........
Page 3
INTRODUCTION 325 SVD is a sensor for sensing AC High Voltage. It provides electric engineering personnel, power engineering personnel, firefighting personnel and instrument equipment workers with prominent warning when approaching high voltage and for taking necessary safety action, preventing illusion and misjudgment which could lead to electric shock to person.
Page 4
FEATURES ● Designed for detecting un-shielded cables. If the shielding of the cable is connected to the ground, it can't work. ● Compact, easy to wear and convenient in use. ● Designed for indoor and outdoor use. ● Water-proof design. (IP65) ●...
Page 5
SPECIFICATION ● Distance of starting warning : 120 cm for 11kV ● Applicable frequency : 50 / 60 Hz ● Volume : 65dB at 1 meter distance ● Operating Temp & Humidity : 0ºC ~ 40ºC 80% R.H. Max. ● Outside dimensions : 79(L) ×...
Page 6
METHOD OF USE ● Inspection before use (1) Check the appearance and structure for any abnormality. (2) Press Self-Test switch (about 3 seconds) to confirm all functions are working normally. (3) To be careful and to avoid misjudgment, test the unit by contacting AC 110V insulated wire with its front side to see if it sounds and flashes.
Page 7
CLEANING & REPLACING BATTERY 1. Sensing side shall maintain clean. The case may be cleaned with soft fabric and mild detergent. No solvent or corrosive agent may be used. 2. Replacing battery (1) When the sound become weak, the battery shall be replaced.
Page 8
CAUTIONS 1. This instrument is an auxiliary testing unit and is only for obtaining warning as additional protection. Never use this instrument as substitution for Tester. Electrical Test shall be the prime electric testing instrument. 2. Other than affected by now you wear, the sensing and warning distance may be influenced by direction of electric article, ambient environment, shielding objects and...
Need help?
Do you have a question about the 325 SVD and is the answer not in the manual?
Questions and answers