Page 1
CX1000 Complete Air Purification System Portable Unit User’s Guide Read and save these Instructions Continental Fan Manufacturing Inc. Buffalo, NY, U.S.A.
IMPORTANT SAFETY INSTRUCTIONS Always unplug the CX1000 when it is not in operation, while the filters or UV light are being changed, and when cleaning the unit. After servicing the unit, both the front and top grill assemblies must be reinstalled in exactly the same manner as prior to removal.
Thank you for purchasing the CX1000 Complete Air Purification System. This unit features unique air purification technologies not found in any other air purifier. Only CX1000 combines these features: A quiet, energy efficient, backward-curved motorized impeller that moves 265 cfm of air.
(figure 1) will light and the UV lamp will be on. figure 1 2. Look into the air outlet at the top of the CX1000 to confirm that the UV lamp is operating. There is a faint blue glow when the lamp is on.
1. Determine the area of the room the CX1000 is to purify. 2. From the table below, identify the respiratory condition the unit is to serve. Heavy Duty People with Severe Respiratory Problems Super Mode SQ. FT Extra Large Auto Mode SQ.
Air VOLUME is indicated by one of seven lights, representing a range from MAX to MIN (figure 4). Set the CX1000 to move a volume of air appro- priate for room conditions. Note that measurements are relative to the selected room size. Make sure that the ROOM SIZE panel (figure 2) is always set for the room in which the unit is to operate.
Lights on the SERVICE panel indicate if either the UV lamp or the air fil- ters will soon need to be replaced, or if they must be replaced before using the CX1000 again. UV LAMP INDICATOR LIGHTS The UV lamp has a useful life of one year (9,000) hours), with a one month grace period.
30 days. 1. Unplug the power cord from the electrical outlet. 2. Using index fingers, squeeze the locking tabs (figure 6) inward towards the center of the grill on top of the CX1000. Lift the grill and remove. figure 6 3.
30 days. 1. Unplug the CX1000 power cord from the electrical outlet. 2. Rest the CX1000 on its back (figure 8) to access the bottom of the unit. 3. Press-in locking clips at each end of the front grill.
Shipping cost to the factory or service center is the responsibility of the owner of the CX1000. To return product for warranty repair, the customer must first contact the factory for a Return Materials Authorization (RMA) number and a ship to address, as it may differ from the manufacturing location.
Page 12
Continental Fan Manufacturing Inc. 203 Eggert Road Buffalo, New York 14215 Tel: 800-779-4021 Fax: 716-842-0611 email: cfm@continentalfan.com web: www.continentalfan.com...
Need help?
Do you have a question about the CX1000 and is the answer not in the manual?
Questions and answers