CFM CX1000 Maintenance Instructions Manual
Portable
Hide thumbs
Also See for CX1000:
- User manual (12 pages) ,
- Installation & maintenance instructions manual (11 pages)
Related Manuals for CFM CX1000
Summary of Contents for CFM CX1000
- Page 1 Maintenance Instructions CX1000 CX1000 Portable Air Purifier Portable Air Purifier...
-
Page 2: Product Specifications
PRODUCT SPECIFICATIONS Manufacturer: Continental Fan Manufacturing Inc. Model: CX1000 Portable Air Purifier Unit Dimensions: 21.3" W x 19.0" H x 8.0" D Unit Weight: 23 lbs Max Airflow: 265 cfm Power Consumption: 110 watts Voltage: 1/120V/60 Maximum Amps: 0.95 UV Range:... -
Page 3: Before Installation
WARNING To reduce the risk of electric shock and injury, do not place in a window. CX1000 Portable Air Purifier is designed to be used on a flat and level surface, and may not work properly on an uneven surface. -
Page 4: Operation
Press the Power button on the Control Panel to turn on the CX1000. Lights on the panel will illuminate and the UVC lamp will turn on (Fig. 1). Look into the air outlet at the top of the CX1000 to confirm that the UVC lamp is operating with a faint blue glow. -
Page 5: Maintenance
MAINTENANCE Control Panel lights indicate when maintenance is required, and if either the UVC lamp or the air filters need to be cleaned or replaced. AIR FILTERS The filters have a useful life of one year in a typical residential environment. •... - Page 6 REPLACING UVC LAMP When the UV Lamp light on the Control Panel (Fig. 1) turns orange, the UVC lamp should be replaced within 30 days. Turn the unit off and unplug the power cord from the electrical outlet. Using index fingers, squeeze the locking tabs inward toward the center of the grille.
-
Page 7: Replacing Filters
Control Panel with a pin or similar object. The Air Filter light will turn green, indicating the timer has been reset. Restore the CX1000 to normal operation as follows: Set the unit in its normal operating position. Plug the power cord into the wall outlet. -
Page 8: Limited Warranty
LIMITED WARRANTY Subject to the provisions of the clauses herein, Vendor agrees to correct any defect or defects in workmanship or materials which may develop under proper and normal use, by repair or by replacement of the defective part or equipment, at Vendor’s option, FOB factory.