Initial Set up
After connecting the module, enter the Peripherals Menu and select the port which
you want to join with the module.
Peripherals
For DDU Control Unit
1. Select the module from the list of peripheral
connections. Remember your first connection
is denoted as "a", the second being "b", etc.
(e.g. MSE_a, MSE_b,...)
2. Press Menu or Back to save changes.
Once set up, you can change the module
settings by entering the Peripherals Menu.
For DMU Control Unit
When a new module is detected, a pop-up
screen appears and proceed as indicated.
If no screen is shown, click on the icon
on the main bar and follow the steps.
Once set up, you can change the module
settings by entering the Peripherals Menu.
4
Peripherals
Port 2-DR
Pedal
Module
Module
MSE_a
None
17:14
MODULE
Air pump
Install
Postpone
Appears only when the
installation is postponed
17:14
None
None
?
MENU