Download Print this page

Charging The Battery Manually; Maintaining Your Origami - 4MOMS Origami 4M-006-01 Quick Start Manual

Advertisement

Available languages
  • EN

Available languages

  • ENGLISH, page 1
CHAPTER 8: CHARGING THE BATTERY MANUALLY
The Origami is equipped with an on-board
generator to charge its battery whenever you are
pushing the stroller. With normal use, you should not
have to charge your battery.
If your origami battery is fully drained you can
charge it using the included wall adapter.
Use only included wall adapter to charge the battery.
This wall adapter battery charger is not a toy.
This wall adapter is for indoor use only.
Use the wall adapter battery charger only
under adult supervision.
16
CHAPTER 9: MAINTAINING YOUR ORIGAMI
Wheels and Power Pod
The Origami is designed to handle many types of
ground and rough terrain. However, to keep the
stroller in peak condition, keep the wheel bearings
free of sand and abrasive grit, and wipe water off the
Power Pod after use. Do not submerge any part the
stroller or use running water to clean it.
Battery
Extremely low temperatures can decrease the
battery life of the Origami, or prevent the battery
from working at all. We recommend you not store
the Origami below freezing temperatures, or use it in
temperatures of less than zero degrees fahrenheit.
Frame
To clean the plastic or aluminum parts of the Origami,
wipe with a solution of mild soap and water. Do not
use bleach. Keep the Handlebar, Central Bar, and
seat ring frame free of sand and abrasive grit. Avoid
getting oil or lubricants on the plastic parts, as this
can chemically degrade the plastic.
Storage Bag and Seat Insert
The Storage Bag and Seat Insert are machine
washable.
To remove the Seat Insert, unbuckle the Safety
Harness. Unbuckle the shoulder straps from the back
of the Origami seat, and slide them out of the seat
insert. Undo the snap inside the crotch restraint sleeve
and slide that buckle out of the seat insert, then
remove the insert.
English
17

Advertisement

loading