Advertisement
3. Pairing the camera using Mirabella Genio App
1. Remove the plastic cover on back to expose the ON/OFF switch, slide
the switch to ON.
2. Press the doorbell button, wait for 6-30 seconds, the outer ring on the
doorbell button will start to blink red slowly, (1 blink every two
seconds)
if it is blinking fast (2 blinks per second) rather than slowly, you will
need press and hold the reset button until you hear a sound, then the
LED will now start to blink RED slowly. (1 blink every two seconds).
3. Please ensure your mobile phone is connected to your 2.4Ghz Wi-Fi
network (DO NOT use Wi-Fi name ending with -5G)
4. Open the Mirabella Genio APP, tap on +, then choose Security &
Sensor
Select your doorbell camera from the list of smart camera icon
6 |
P a g e
Advertisement
