Advertisement
Quick Links
Advertisement
Summary of Contents for KMART Bell 15S
- Page 1 Quick Start Guide FULL HD Doorbell Camera Model: 43061068 Bell 15S v1.0 30/03/2021 P a g e...
- Page 2 Welcome, Thank you for choosing our smart camera, getting started is easy What’s included Bell 15S USB charging cable USB chime Wall mount screw sets Product Details P a g e...
- Page 3 Connection Preparation It is important that your phone is connected to the 2.4Ghz Wi-Fi and not to the 5GHz network. To verify your mobile device is set to a 2.4Ghz Wi-Fi network, navigate to the Settings menu and click on Wi-Fi. In this menu you will see all the detectable networks in your area.
- Page 4 1. Install the APP and register Account Download the "Mirabella Genio" APP to your smartphone from the App Store or Google Play. Insert the Micro SD card (not included) (Please note that the camera will work without an SD card, but it will not be able to record any footage.) Remove the rubber cap to expose the SD card slot, insert the Micro SD card gently into the SD card slot.
- Page 5 2. Doorbell Camera Installation P a g e...
- Page 6 3. Pairing the camera using Mirabella Genio App 1. Remove the plastic cover on back to expose the ON/OFF switch, slide the switch to ON. 2. Press the doorbell button, wait for 6-30 seconds, the outer ring on the doorbell button will start to blink red slowly, (1 blink every two seconds) if it is blinking fast (2 blinks per second) rather than slowly, you will need press and hold the reset button until you hear a sound, then the...
- Page 7 5. Double check and ensure that the LED indicator light is still red and blinking slowly, tap confirm blinking slowly and enter your 2.4GHz Wi- Fi name and password (not your genio password) 6. Tap continue and the QR code will appear, place this QR code in front of the camera at approximate 15-20cm, until your hear a sound, the indicator light will now change from blinking red to blinking blue example of how to scan QR code...
- Page 8 7. Please wait for indicator light to switch to solid blue, then tap the beeped/indicator switch button 8. Camera is now successfully added into your APP. Please refer to the FAQ section for troubleshooting if this method does not connect. Q.
- Page 9 4. Pairing the Wireless Chime 1. Insert the chime into any standard USB outlet or adaptor (not included), the chime needs to be in 5 metres range of the doorbell 2. Open the Mirabella genio APP, tap on doorbell ->setting-> bell setting >choose Wireless Chime or Chime Type , select Wireless Chime 3.
- Page 10 Camera interface is subject to slight alterations based on firmware updates Tap on the pencil icon or … icon you can access the camera’s Settings page To take snapshot of the screen and save it to phone’s camera roll Tap to speak to the camera Record live footage into your phone’s internal storage Access to the footage recorded on the...
- Page 11 Device Name: you can customize the doorbell name here Share Device, if you wish to share or remove this camera with other genio APP user Device information: detail information for this camera, owner information, Virtual ID, IP address etc Power Management Settings: set the battery reminder percentage Basic Function Settings: please ensure Talk Mode is set as Two Way Talk,...
- Page 12 FAQ: How to connect camera to another router/genio account? Go the camera’ settings page, look for “remove device” Remove it and reset the camera and pair it again through the APP. Poor performance, takes a long time to load the live footage? Please check the Wi-Fi signal, if it is less than 60%, you will need consider changing the camera location or purchase a Wi-Fi extender to boost the signal.
- Page 13 MOST smart products in Australia only work on the 2.4Ghz signal. All trademarks are used for reference purposes only. Made in China ANKO, HOME&CO AND AUDIOSONIC® ARE TRADEMARKS OF KMART AUSTRLIA LIMITED. MIRABELLA INTERNATIONAL PTY LTD 1 MIRABELLA DRIVE, TULLMARINE, VIC, AUSTRALIA 3043 TOLL FREE: 1800 636 528, www.mirabellagenio.com.au...
- Page 14 WARNING: Li-ion battery handling notice Always read the instruction manual and any warnings on the device before using a lithium-ion battery. Rechargeable lithium-ion batteries can explode, release flames, and/or cause burns if disassembled, punctured, cut, crushed, short-circuited, incinerated, recharged incorrectly, or exposed to water, fire, or high temperatures.