Carver ZR1000 User Manual page 5

PERFORMANCE
THD+N:
IMD (SMPTE):
Dynamic Headroom:
Power Bandwidth:
Frequency Response:
Signal-to-Noise:
Crosstalk:
CMRR:
Slew Rate:
Sensitivity for Rated Power:
(Variable settings via jumpers)
Input Impedance TD ((Variableped 1.23Vrm1.245V9 Tf 16.5(e TD ((Variableped 1.23Vrm1.2f -167.362 -137re8/ 16.5(e TD (TD (08
62362 m 192(27 l S 5j752 j 130 27 m 0130 -1l 131 Tj l 131.62 2j l 132MRR:24)Tj l 133MRR:24
62362 m 192(63362 l 141 64362 l 140 64362 l 13 BT 63362 l 13 BT 62362 l S 5j752 j 169.j 45)Tj m 0169.j 46
<0.5% @ rated power (4 ohm), 20-20kHz, 20kHz BW
<0.15% @ rated power (4 ohm), 1kHz
<0.06% @ -10dB referenced to rated power (4 ohm), 1kHz
<0.2%, 60Hz/7kHz, 4:1, 35Vpeak @ 4 ohms
100dB, A-Weighted, referenced to 4 ohm rated power, 22kHz BW
-70dB @1kHz referenced to rated power (4 ohm)
1.5dB
20-20 kHz @ 4 and 8 ohm loads
20-20kHz, +0dB/-1dB
70dB at 1kHz
7V/Sec
0.316Vrms
0.775Vrms(Factory Preset)
1.23Vrms
2.45Vrms
3.j0
5