Osd Warning Messages - Dell S2421H User Manual

OSD warning messages

When the monitor does not support a particular resolution mode, you can see the
following message:
This means that the monitor cannot synchronize with the signal that it is receiving
from the computer. See
frequency ranges addressable by this monitor. Recommended mode is 1920 x 1080.
You can see the following message before the DDC/CI function is disabled:
When the monitor enters the Standby mode, the following message appears:
Activate the computer and wake up the monitor to gain access to the OSD.
Dell 24/27 Monitor
The current input timing is not supported by the monitor display. Please
change your input timing to 1920x1080, 60Hz
listed timing as per the monitor specifications.
Resolution Specifications
Dell 24/27 Monitor
The function of adjusting display setting using PC application will be
disabled.
Do you wish to disable DDC/CI function?
Yes
Dell 24/27 Monitor
Going into Standby mode...
or any other monitor
S2421H/S2721H
for the Horizontal and Vertical
No
S2421H/S2721H
S2421H/S2721H
Operating the monitor | 47