Product Features - Dell S2421H User Manual

Product features

The Dell S2421H/S2721H monitor has an active matrix, Thin Film Transistor (TFT),
Liquid Crystal Display (LCD), and LED backlight. The monitor features include:
• S2421H: 60.45 cm (23.80 in.) active area display (measured diagonally) 1920 x
1080 (16:9) resolution, plus full-screen support for lower resolutions.
• S2721H: 68.60 cm (27 in.) active area display (measured diagonally) 1920 x 1080
(16:9) resolution, plus full-screen support for lower resolutions.
• Tilt adjustment capability.
• Removable pedestal and Video Electronics Standards Association (VESA™) 100
mm mounting holes for flexible mounting solutions.
• Ultra-thin bezel minimizes the bezel gap in multi-monitor usage, enabling easier
set up with an elegant viewing experience.
• Extensive digital connectivity with HDMI helps future-proof your monitor.
• Plug and play capability if supported by your system.
• On-Screen Display (OSD) adjustments for ease of set-up and screen
optimization.
• Supports AMD FreeSync™ technology, AMD Freesync™ certified range from 48
Hz - 75 Hz.
• Power and OSD buttons lock.
• Security lock slot.
• ≤ 0.3 W in Standby Mode.
• The Monitor adopts Flicker-Free technology, which clears the eye visible flicker,
brings comfort viewing experience and preventing users suffer from eye strain
and fatigue.
WARNING: The possible long-term effects of blue light emission from the
monitor may cause damage to the eyes, including eye fatigue or digital
eye strain. ComfortView and ComfortView Plus feature are designed to
reduce the amount of blue light emitted from the monitor to optimize eye
comfort. The ComfortView mode is optional in the OSD. Only when this
mode is not exist in the OSD, the factory default setting is qualified for
the Low Blue Light approval.
NOTE: ComfortView is a feature to reduce blue light emission with preset
color co-ordinates. This can be enabled with the OSD menu. ComfortView
Plus is a feature to reduce blue light emission with panel Backlight design.
No further setting by the user is required.
8 | About your monitor