Summary of Contents for Feig Electronic ID ECCO Smart HF-BLE
Page 1
IDENTIFICATION === Ende der Liste für T extmar ke Dec kbl att === USER GUIDE ID ECCO Smart HF-BLE solid NFC Booster with BLE Interface M10320-2e-ID-B.docx...
Page 2
Composition of the information in this document has been done to the best of our knowledge. FEIG ELECTRONIC GmbH does not guarantee the correctness and completeness of the details given in this manual and may not be held liable for damages ensuing from incorrect or incomplete information. Since, despite all our efforts, errors may not be completely avoided, we are always grateful for your useful tips.
IDENTIFICATION ID ECCO Smart HF-BLE Contents Contents Contents Safety Instructions Battery ..........................5 Revision History of Documentation Scope of delivery Product Description Operation Charging the Battery ......................9 Switch On/Off ........................9 USB – Interface ........................ 10 Device Hardware Reset ....................10 Project Notes RFID/NFC transponder detection ...................
Page 4
IDENTIFICATION ID ECCO Smart HF-BLE Contents Firmware Update Radio Approvals 12.1 Europe Declaration of Conformity (CE) ................. 21 12.2 USA (FCC) and Canada (IC) .................... 21 Technical data Disposal Maintenance and Cleaning 15.1 Cleaning the Housing ...................... 23 Warranty Annex 17.1...
Do not crush, puncture, short circuit the battery or place it in fire or water! Do not attempt to open, disassemble or service the battery! Only charge the battery with the provided USB cable from FEIG ELECTRONIC GmbH Do not deep discharge the battery! ...
Add some installation hits USB driver, Virtual COM Port., LiPo battery 01.07.2021 FCC & IC information update 3 Scope of delivery Mobile Reader ID ECCO Smart HF-BLE USB charging cable (USB connection cable) Quick Start ID ECCO Smart HF-BLE...
IDENTIFICATION ID ECCO Smart HF-BLE Product Description 4 Product Description The ID ECCO Smart captures RFID data for a variety of uses and transmits those to a host via USB connection or Bluetooth LE. The ID ECCO Smart is used wherever the read range of an NFC smartphone is insufficient for efficient work with RFID transponders or the ambient conditions require a more robust device.
Page 8
IDENTIFICATION ID ECCO Smart HF-BLE Product Description Press the keys 7 and 8 for 8 sec. to perform a Hardware Reset USB protection clip Rubber clip to protect the Mini USB port. Mini-USB interface Main communication and battery charging interface.
IDENTIFICATION ID ECCO Smart HF-BLE Operation 5 Operation Operation 5.1 Charging the Battery Before the first operation, the battery should be fully charged by using the included USB charging cable. As long as the battery is charging the yellow LED will light solid yellow. After the battery is fully charged the yellow LED turns off.
IDENTIFICATION ID ECCO Smart HF-BLE Operation 5.3 USB – Interface There is a Mini USB-socket 9 on the base for the connection of the USB-Interface. The pin out is standardized. The data rate is reduced to 12 Mbit (USB full speed). A standard USB-cable can be used.
IDENTIFICATION ID ECCO Smart HF-BLE Project Notes 6 Project Notes 6.1 RFID/NFC transponder detection By sending an ISO 15693 command the reader read RFID/NFC data of the ISO 15693 compatible transponder. The reader ID ECCO Smart has an integrated antenna and two main detection areas (green) to read tags in different orientations.
Page 12
IDENTIFICATION ID ECCO Smart HF-BLE Project Notes Fig. 6: Read NFC tag in a LED driver with the bottom antenna Fig. 7: Read NFC tag in a LED driver with the front antenna USER GUIDE Page 12 of 25...
IDENTIFICATION ID ECCO Smart HF-BLE Project Notes 6.2 Bluetooth LE connection The mobile reader ID ECCO Smart can be connected via Bluetooth Low Energy (BLE) interface to a device which is compatible with Bluetooth Low Energy Version 4.2 or higher such as a computer or smartphone.
IDENTIFICATION ID ECCO Smart HF-BLE Project Notes 6.3 BLE Reader profile The ID ECCO Smart BLE profile of the reader supports 6 different BLE services with 16 different BLE characteristics. The Service “NFC Reader Service” is a part of the standard Zhaga “Book 25”. For further information contact the Zhaga Consortium at https://zhaga.org/...
For first tests one of the different Apps for BLE in the iOS App Store could be used. In this example, FEIG ELECTRONIC use BLE App of LightBlue®. (iOS Version 11.00 or higher is required) 1. If the ECCO Smart is on, please switch it off.
Android is necessary. For first tests one of the different App in the App Store “Google Play” could be used. In this example, FEIG ELECTRONIC use the App BLE Debugger 1. If the ECCO Smart is on, please switch it off.
7. Click on the “Detect” button and the Reader Detection window will open 8. Set the communication interface to USB and click on the “Detect” button in the window 9. The Reader Detection window show the ID ECCO Smart HF-BLE and the actual firmware version Fig. 9: Detect window if ISOStart+ 10.
IDENTIFICATION ID ECCO Smart HF-BLE Connection with WIN10 PC 9.3 ID BLE.USB Dongle To connect the reader ID ECCO Smart via Bluetooth Low Energy (BLE) with a WIN 10 computer FEIG ELECTRONIC GmbH offer BLE – USB Dongle “ID BLE.USB” with an integrated FEIG Bluetooth LE V4.2 Data Service This USB device allows to open a virtual COM port at the PC.
10. Click on the “Detect” button in the window. Note: 11. The Reader Detection window show the ID ECCO Smart HF-BLE and the actual firmware version. 12. Click on button “Run without change” and the Window for the detected reader will open 13.
IDENTIFICATION ID ECCO Smart HF-BLE Reader configuration 10 Reader configuration By using the Configuration and Test tool ISOStart+ different reader configuration parameter and reader commands are available. The description of the reader commands and the description of the function of the parameter, the default parameter are available at the system manual of the reader.
12 Radio Approvals 12.1 Europe Declaration of Conformity (CE) Hereby FEIG ELECTRONIC GmbH declares that the radio equipment type ID ECCO Smart HF-BLE is in compliance with Directive 2014/53/EU. The full text of the EU declaration of conformity is available at the following internet address: https://www.feig.de/en/service/eu-declarations-of-conformity/...
IDENTIFICATION ID ECCO Smart HF-BLE Technical data 13 Technical data Mechanical Data Housing Double-walled Inside: robust ABS Outside: protective rubber coating Dimension (W x H x D) 87 mm x 48 mm x 26 mm (3.42“ x 1.89“ x 1.02“) Weight 98 g (3.46 oz)
IDENTIFICATION ID ECCO Smart HF-BLE Disposal 14 Disposal Disposal Never dispose of Lithium Polymer (LiPo) batteries in household waste! LiPo batteries can be disposed of at special collection points. Before disposal, make sure that the LiPo battery is completely discharged.
16 Warranty Warranty FEIG ELECTRONIC warrants that the product will be free of defects in material and workmanship for 12 months from the date of shipment when used as intended. FEIG ELECTRONIC will, at its option, either repair or replace the defective products. Such repair or replacement shall be buyer’s sole remedy in the event of manufacturer’s breach of his limited warranty.
IDENTIFICATION ID ECCO Smart HF-BLE Annex 17 Annex 17.1 Accessories The following accessories are available for the Reader ID ECCO Smart. Article No. Name Description ID BLE.USB - Dongle USB BLE 4.2 dongle which is serial USB to UART 5903.000.00...