PEIKER CEE CEECOACH PLUS Instruction Manual
  1. Manuals
  2. Brands
  3. PEIKER CEE Manuals
  4. Conference System
  5. CEECOACH PLUS
  6. Instruction manual

PEIKER CEE CEECOACH PLUS Instruction Manual

Communication device
Hide thumbs Also See for CEECOACH PLUS:
Table of Contents

Advertisement

Quick Links

Download this manual
Communication Device
PLUS
CEECOACH
Instruction manual
English translation of the original instruction manual
09/2020

Advertisement

Table of Contents
loading

Related Manuals for PEIKER CEE CEECOACH PLUS

Summary of Contents for PEIKER CEE CEECOACH PLUS

  • Page 1 Communication Device PLUS CEECOACH Instruction manual English translation of the original instruction manual 09/2020...

  • Page 3: Table Of Contents

    Table of contents Notes on the manual and the manufacturer ..........3 Keep manual available ................ 3 Online available information .............. 3 Design features in the text..............3 Copyright ....................4 Manufacturer address ................. 4 Security ......................5 Intended use ..................5 Basic Safety Instructions..............
  • Page 4 Putting the device into operation ............... 13 Connect device to a Bluetooth headset ............ 14 Wear the device on your belt ..............16 Attach the device to the upper arm............18 Switching the device on and off ..............19 Switch microphone on and off (mute function) ........20 Adjust volume ....................

  • Page 5: Notes On The Manual And The Manufacturer

    Notes on the manual and the manufacturer PLUS These instructions will help you to use the CEECOACH device safely with 01.00.xx or higher versions. PLUS The device CEECOACH is called "device" in the following. Keep manual available This manual is part of the device. Make sure that this manual is always available for you.

  • Page 6: Copyright

    This manual contains information that is subject to copyright. This manual may not be copied, printed, filmed, processed, duplicated or distributed in any form, either in whole or in part, without the prior written consent of peiker CEE GmbH. ©2020 peiker CEE GmbH All rights reserved.

  • Page 7: Security

    Security Intended use The device is used for group communication in the sports and leisure sector. A maximum of 16 participants can communicate in a conference with the device. The range between the participants is up to 500 meters. Reading and understanding this manual is also part of the intended use. Furthermore, you must observe and follow all information in this manual, especially the safety instructions.
  • Page 8 Avoid hearing damage Too high volume levels can irreparably damage your hearing.  Avoid continuous exposure to sound at maximum volume. Avoid environmental damage  Dispose of the device and its components according to the regulations in force at the place of use applicable provisions. Avoid headset cable break ...

  • Page 9: Design Features Of The Warning Notices

    Design features of the warning notices WARNING Notes with the word WARNING warn of a dangerous situation that could possibly lead to death or serious injury. CAUTION Notes with the word CAUTION warn of a situation, which can lead to light or medium injuries. Design features of the indications of material damage ATTENTION! These notes warn of a situation that could lead to material...

  • Page 10: Description

    Description Scope of delivery Designation Belt clip (×2 in the Duo Set) Mount (×2 in the Duo Set) Device (×2 in the Duo Set) Headset (×2 in the Duo Set)

  • Page 11: Task And Function

    Designation Velcro (×2 in the Duo Set) Screwdriver USB C cable (×2 in the Duo Set) Plug (country-specific) Plug (country-specific) Battery Charger Task and function The device is used for group communication in sports and leisure time. A maximum of 16 participants can communicate with the device in one conference.

  • Page 12: Control Elements

    Control Elements...

  • Page 13: Indications In The Light Ring

    Designation Function key for connecting the device to other devices Connection socket for headset USB socket for USB-C cable Minus key: decrease volume Function key for connecting the device to other devices or with the Bluetooth headset Main key: Switch device on and off Switch microphone on and off Plus key: Increase volume illuminated ring...

  • Page 14: Unpacking And Checking The Scope Of Delivery

    Unpacking and checking the scope of delivery WARNING Small parts are included in the delivery. Children can swallow the small parts while playing and choke on it. Make sure that the small parts do not fall into the hands of children.

  • Page 15: Putting The Device Into Operation

    Putting the device into operation  Switch the unit on (see section "Switching the unit on and off").  Use the headset as described in the GA of the respective manufacturer.  When using a Bluetooth headset, proceed as described in the "Connecting Device to a Bluetooth Headset"...

  • Page 16: Connect Device To A Bluetooth Headset

    Connect device to a Bluetooth headset  Switch the unit on (see section "Switching the unit on and off").  Switch the Bluetooth headset on.  Make sure that the Bluetooth headset is in pairing mode. Follow the instructions in the Bluetooth headset user manual. ...
  • Page 17 If the connection is not successful, this could be have the following causes:  The Bluetooth headset does not allow pairing.  The battery of the Headset is discharged.  Make sure that the Bluetooth headset allows pairing.  Proceed as described in the operating instructions for the Bluetooth headset.

  • Page 18: Wear The Device On Your Belt

    Wear the device on your belt ATTENTION! Damage to the device due to incorrect wearing is possible. If possible, attach the device to the belt with the supplied belt clip or wear it securely on your upper arm. Do not drop the device. Avoid shock loads.
  • Page 19 Alternatively, you can thread the belt through the belt clip.  To remove, lift the nose of the belt clip and pull the device together with the belt clip off the belt.  To remove the belt clip, pull the locking lever upwards and remove the belt clip from the device.

  • Page 20: Attach The Device To The Upper Arm

    Attach the device to the upper arm  Remove the holder (1.) on the bracket. Use the supplied screwdriver.  Guide the Velcro tape (2) through the loops (1) as shown (2.) and pull it through to the end.  To attach the device to your upper arm, pass the velcro through the flap.

  • Page 21: Switching The Device On And Off

    Switching the device on and off   To switch on the device, press and hold the main button for at least 3 seconds.  The light ring then displays a color for 3 seconds (depending on the battery charge: green, orange, or red). You will also hear the message “Power on”. The light ring flashes 3 times in cyan or white if the device is not connected to any other device.

  • Page 22: Switch Microphone On And Off (Mute Function)

    Switch microphone on and off (mute function)  To mute the microphone, press the main button briefly. You will hear the message “Muting on”. The light ring flashes magenta. Now you will not be heard by other connected participants.  To unmute the microphone, press the main button briefly again.

  • Page 23: Adjust Volume

    Adjust volume CAUTION Damage to hearing possible due to too loud noises. Avoid continuous exposure to sound at maximum volume.  To increase the volume, press the Plus key step by step. The device becomes louder in 1/12 steps. The color display in the light ring becomes larger.

  • Page 24: Create A Group

    Create a group You can create a group with up to 15 other devices. The distance between the devices must be under 30 ft while connecting.  Make sure that the devices to be connected are within range.  Switch on the devices (see "Switching the device on and off" from page 6).

  • Page 27: Charge Device

    Charge device WARNING Fire possible due to overheated components. Never charge the battery unattended. You want to check the charge status of your device - switch the device on or off, during this process the loading status is displayed. If the battery is less than 30% charged, you should charge the device. Plug the USB-C cable plug (2) into the USB socket (1).
  • Page 28  Connect the other USB plug to the charger.  Connect the charger to a suitable power socket. The charging time depends on the ambient temperature and the Power of the charger. When the battery of the device is charged, the light ring will light up green when the device is switched off.

  • Page 29: Resetting The Device To The Basic Setting

    Resetting the device to the basic setting  Make sure that the device is switched on.  Press the main key (1) and the plus and minus key simultaneously and hold for more than five seconds. The light ring (2) shines green twice, white once and then orange. The device is switched off.

  • Page 30: Troubleshooting

    Repeat the process. loaded On the peiker CEE Internet page you will find a list of frequently asked Questions (FAQ), which is constantly updated. Also check there if there is an answer for your problem.

  • Page 31: Cleaning The Device

    Cleaning the device ATTENTION! Damage to the device possible by using strong cleaning agents. Use only mild detergents for heavy soiling cleaning agent.  Clean the device and the headset if necessary with a light moistened cloth.  If the device is heavily soiled, clean it only with mild Cleaning agents, e.g.

  • Page 32: Store And Transport The Device

    Store and transport the device  Store the device and its components in a dry, dust-free place.  Use for storage and transport for example the optionally available transport bag.

  • Page 33: Dispose Of The Device

    Dispose of the device At the end of its service life, the device and its components must be disposed of in an environmentally friendly manner.  Dispose of the device in accordance with the regulations applicable at the place of use. ...

  • Page 34: Technical Data

    Technical data Number of users 2-16 participants Dimensions (W x H x D) 97 x 57 x 22 mm Weight 96 g Mounting Clip can be locked in 90° steps Display illuminated ring with 12 LEDs, multicolor Number of keys 5 buttons Bluetooth headset or standard 3.5 mm Headset connection...

  • Page 36: Guarantee Statements

    Guarantee statements peiker CEE GmbH (peiker Consumer Electronics Evolution GmbH) grants a manufacturer's warranty of two years from the date of purchase on all parts included in the scope of delivery within the scope of legal regulations (proof of purchase receipt). Improper handling or incorrect use shall exclude...

  • Page 37: Eu Declaration Of Conformity

    EU Declaration of Conformity Hereby peiker CEE GmbH (peiker Consumer Electronics Evolution GmbH) declares that the device complies with the requirements and other relevant regulations of the directive RED 2014/53/EU. You can find further information at: https://www.peiker-cee.de/doc...

  • Page 38: Fcc-Note

     Consult the dealer or an experienced radio / TV technician for help. Note regarding FCC 15.21 Warning: Changes or modifications not expressly approved by peiker CEE GmbH void user’s authority to operate equipment. Note regarding FCC 15.19 This device complies with Part 15 of the FCC Rules. Operation is subject to...

  • Page 39: Rf Radiation Exposure Statement

    RF Radiation Exposure Statement This equipment complies with the FCC/IC radiation exposure limits set fourth for portable transmitting devices operation in an uncontrolled environment. End users must follow the specific operating instructions to satisfy RF exposure compliance.  This transmitter must not be co-located or operation in conjunction with any other antenna or transmitter.

  • Page 40: Canada, Industry Canada (Ic) Notices

    Canada, Industry Canada (IC) Notices This device complies with Industry Canada’s licence-exempt RSS-102, RSS-247. Operation is subject to the following two conditions: (1) This device may not cause interference; and (2) This device must accept any interference, including interference that may cause undesired operation of the device.

Table of Contents