Basic Operation; Hardware Design - Ebyte E72-2G4M05S1G User Manual

Chengdu Ebyte Electronic Technology Co.,Ltd.
16 DIO_12
17 DIO_13
18 DIO_14
19 DIO_15
JTAG_
20
TMS
JTAG_
21
TCK
22 DIO_16
23 DIO_17
24 DIO_18
25 DIO_19
26 DIO_20
27 GND
28 DIO_21
29 VDD
30 DIO_22
31 DIO_23
nRESE
32
T
33 DIO_24
34 DIO_25
35 DIO_26
36 DIO_27
37 DIO_28
38 DIO_29
39 DIO_30
40、41、
GND
42

4 Basic operation

4.1 Hardware design

It is recommended to use a DC stabilized power supply. The power supply ripple factor is as small as possible and

the module needs to be reliably grounded;
Please pay attention to the correct connection of the positive and negative poles of the power supply,

reverse connection may cause permanent damage to the module;
Please check the power supply to ensure that between the recommended supply voltage, if exceeding the maximum,

the module will be permanently damaged;
Please check the stability of the power supply. Voltage can not fluctuate greatly and frequently;

Copyright ©2012–2021，成都亿佰特电子科技有限公司
Input/Output
Input/Output
Input/Output
Input/Output
Input/Output
Input/Output
Input/Output High drive General IO port, JTAG_TDO (see CC26xx manual for details)
Input/Output High drive General IO port, JTAG_TDI (see CC26xx manual for details)
Input/Output
Input/Output
Input/Output
-
Input/Output
Input/Output
Input/Output General IO port, sensor controller, Digital and analog (see CC26xx manual for details)
Input
Input/Output General IO port, sensor controller, Digital and analog (see CC26xx manual for details)
Input/Output General IO port, sensor controller, Digital and analog (see CC26xx manual for details)
Input/Output General IO port, sensor controller, Digital and analog (see CC26xx manual for details)
Input/Output General IO port, sensor controller, Digital and analog (see CC26xx manual for details)
Input/Output General IO port, sensor controller, Digital and analog (see CC26xx manual for details)
Input/Output General IO port, sensor controller, Digital and analog (see CC26xx manual for details)
Input/Output General IO port, sensor controller, Digital and analog (see CC26xx manual for details)
-
General IO port (see CC26xx manual for details)
General IO port (see CC26xx manual for details)
General IO port (see CC26xx manual for details)
General IO port (see CC26xx manual for details)
JTAG_TMSC, High drive (see CC26xx manual for details)
JTAG_TCKC, High drive (see CC26xx manual for details)
General IO port (see CC26xx manual for details)
General IO port (see CC26xx manual for details)
General IO port (see CC26xx manual for details)
Ground
Reset, low level (see CC26xx manual for details)
Power supply, 1.8V - 3.6V
Reset, low level (see CC26xx manual for details)
Reset, low level (see CC26xx manual for details)
Ground
E72-2G4M05S1G User Manual
6