Advertisement
Available languages
Available languages
Bagger Usage
NOTE: To ensure longevity and reliable performance do not allow grass bags to fill over the
edge of the rim before emptying.
NOTE: When both grass bags are full, place the tractor on a firm, level surface, disengage
the PTO, turn the tractor engine off and set the parking brake.
1.
Flip seat up.
2.
Open the bagger cover by pushing in on the rear, right-side tab with your
right hand, as seen in (1) of Figure 28, and lifting the cover with your left
hand in the center rear of the bagger cover (2). Do not remove the chute tube
assembly from the tractor.
3.
Remove the grass bags by lifting up, (1) in Figure 29, and moving the bags
away from the bag support assembly (2).
4.
Empty the grass clippings at a proper disposal site, use the handle at the
bottom of each grass bag. Holding the bag firmly, empty the contents.
5.
Replace the grass bags in the reverse order. Close the lid, pivot the seat
down, restart your tractor and resume cutting your grass.
NOTE: Retighten all wing knobs periodically throughout the season.
OPERATION
2
Figure 28
Figure 29
9
1
1
1
2
Advertisement
