Canon PIXMA MP960 Quick Start Manual page 21

Loading Paper in the Auto Sheet Feeder
1
Flatten the four corners of the paper before loading it.
Note
Align the edges of paper neatly before loading. Loading paper without aligning the edges may
cause paper jams.
If paper is curled, hold the opposing curled corners and gently bend them in the opposite
direction until the paper becomes completely flat. See "Paper is curled." on page 81.
To avoid curling, handle paper as follows.
– Put unused paper back into the package and keep them on a level surface.
– Take out only the necessary number of sheets from the package, just before printing.
2
Prepare to load paper.
(1) Open the Sheet Feeder Cover and pull out the
Paper Support.
(2) Open the Paper Output Tray.
Put your finger on the top of the Paper Output
Tray and open it gently.
(3) Open the Output Tray Extension.
(4) Press the Paper Feed Switch so that the Auto
Sheet Feeder lamp (A) lights.
Note
You can also select the paper source with the printer
driver.
For details, refer to the Printer Driver Guide on-screen
manual.
(A) (4)
(3)
Before Printing
(1)
(2)
17