Table of Contents
Advertisement
4
Connect the power cord to the unit
Power cord
Power switch section
5
Turn on the power and raise the backrest to the upright
position.
①
Insert the power plug into the power
outlet.
ㅡ Always be sure to insert into an AC 220 V
plug.
②
Confirm the lock switch key is set to
the "打开" (open) position.
③
Confirm the power switch is set to
the "开" (on) position.
④
Press
on the controller twice.
ㅡ Press once, and then press again
approx. 1 second later. Backrest will rise
automatically.
①
Appliance inlet
②
③
Connector
GROUNDING INSTRUCTIONS
●
●
Check for dirt and damage on appliance inlet of the
power switch section and the connector of the power
cord.
Insert the connector into the appliance inlet.
Be sure to push the connector in all the way.
This unit must be grounded. If it should malfunction or
breakdown, grounding provides a path of least resistance for
electric current to reduce the risk of electric shock.
This unit is equipped with a cord having an equipment-
grounding conductor and a grounding plug. The plug
must be plugged into an appropriate outlet that is properly
installed and grounded in accordance with all local codes
and ordinances.
①
②
●
Do not allow the leg
cover to hook the
power cord.
③
●
EN11
Advertisement
Chapters
Table of Contents
