Do you have a question about the noken SQUARE 100251837 N806718582 and is the answer not in the manual?
Questions and answers
Benton
May 9, 2025
100251837 Noken Square Mirror with sensors please show me how to turn on and turn off the led lights. When I connected the power, the lights turned on but do not know how to turn them off. The instructions are not clear. (waving at the bottome) Please provide detailed instructions asap.
2 comments:
Mr. Anderson
May 19, 2025
To turn on the LED lights on the Porcelanosa Noken Square Mirror (part number 100251837), move your hand once under the bottom part of the mirror where the sensor is located. Wait for the light to turn on. To turn it off, move your hand once again under the same area. Avoid moving your hand twice quickly, as this may cause the light to turn on and then off immediately.
This answer is automatically generated
Ben
May 20, 2025
M Andersen, thank you for your quick response. I hard wired the mirror with a wireless switch while waiting. I installed the mirror WXL in horizontal position with the transformer box at the bottom. Is the sensor located at the mirror part of the mirror in this position. How can I locate the sensor. Is it embedded as part of the frame itself.
Related Manuals for Porcelanosa noken SQUARE 100251837 N806718582
Page 2
- Please read these instructions carefully before starting installation and retain for future reference.Please leave these instructions with the end user. - Remove all packaging and check the product for missing parts and damages before starting the installation. - We strongly recommend the use of a qualified and registered plumber. - Lire attentivement cette notice avant de commencer l’installation - Vérifier si certaines pièces sont manquantes o abîmées.
Page 5
1.- Since you are in contact with a mirror, have extreme care in handling to avoid scratches or cracks. 2.-Place the mirror so you can watch the rear side. 3.-Take as measurements the distances between the mounting holes (See the picture 1). 4.- Once taken these dimensions, write them down for later use to drill the holes in the wall.
Page 6
Attention. Choose the position in which you want to mount your mirror. Horizontal or Vertical. Attention. Choisissez la position dans laquelle vous souhaitez monter votre miroir. Horizontal ou vertical. Atención. Elija la posicion en que quiere usted montar su espejo. Horizontal o vertical. 1.- First, you have turn the mirror for see back.
Page 7
Never use acid or alkaline products to clean mirrors. The majority of products used to clean glass and tiles can damage the surface, edges and even the mirror’s protective paint. Products with ammoniac, chlorine or bleach, which are components of most of those products, are very harmful for the mirrors.
Page 8
Inicie la limpieza del espejo con plumero para quitar el polvo depositado en su superficie. Inmediatamente, limpiar el espejo con un paño suave y limpio, humedecido en agua tibia. Tenga siempre el cuidado de secar los bordes del espejo. Este es el procedimiento más sencillo y seguro. También puede ser usado un paño limpio y suave humedecido en alcohol.
Page 9
CUIDADOS EXTRAS_SPECIAL ADVICES_ ATTENTIONS EXTRAS_CUIDADOS EXTRAS Al lavar paredes que tengan espejos, nunca aplique agua o productos químicos de limpieza que puedan escurrirse por detrás del espejo o de sus bordes. En el caso de espejos con bordes contiguos, cerciórese que ningún residuo de producto de limpieza quede depositado entre estos.
Page 12
FDP_30-1-0515_100251837_100251814-0620-1 www.noken.com Para consultar la garantía u otra información relativa a este producto, visitar nuestra web: For a warranty or other information on this product, visit our Web address: Pour obtenir une garantie ou d’autres informations sur ce produit, visitez notre site web Para garantia ou outras informações sobre este produto, visite o nosso site...
Need help?
Do you have a question about the noken SQUARE 100251837 N806718582 and is the answer not in the manual?
Questions and answers
100251837 Noken Square Mirror with sensors please show me how to turn on and turn off the led lights. When I connected the power, the lights turned on but do not know how to turn them off. The instructions are not clear. (waving at the bottome) Please provide detailed instructions asap.
To turn on the LED lights on the Porcelanosa Noken Square Mirror (part number 100251837), move your hand once under the bottom part of the mirror where the sensor is located. Wait for the light to turn on. To turn it off, move your hand once again under the same area. Avoid moving your hand twice quickly, as this may cause the light to turn on and then off immediately.
This answer is automatically generated
M Andersen, thank you for your quick response. I hard wired the mirror with a wireless switch while waiting. I installed the mirror WXL in horizontal position with the transformer box at the bottom. Is the sensor located at the mirror part of the mirror in this position. How can I locate the sensor. Is it embedded as part of the frame itself.