Roduct Use P - TCL Sweeva2000 User Manual

4. Product use
Important Tips Before Use
a
Remove power cords and small objects from the floor that may entangle Robot Vacuum.
b
Fold tasseled edges of area rugs underneath to prevent tangling Robot Vacuum. Avoid cleaning very
dark-colored high-pile rugs or rugs thicker than 1.02 in / 26 mm as they may cause Robot Vacuum to
malfunction.
c
Keep Robot Vacuum away from spaces lower than 2.87 in/73 mm to prevent Robot Vacuum from getting
stuck. If necessary, place a physical barrier to block off the problem areas.
d
Keep Robot Vacuum away from wet areas.
e
Robot Vacuum may climb on top of objects less than 0.63 in / 16 mm in height. Remove these objects if
possible.
f
Anti-drop sensors prevent Robot Vacuum from tumbling down stairs and steep drops. They may work
less effectively if dirty or used on reflective/very dark-colored floors. It is recommended to place physical
barriers to block off areas where Sweeva may fall.
Place physical barriers in front of fireplaces and areas that may cause damage to Robot Vacuum if entered.
Prepare
1. Please install side brushes before use.
①
Before use, the user should remove the foam placed on both sides of the front bumper
3. Place the Charging base on a hard ,level surface and against a wall
②
- 07 -
2.Remove the limit stripes in the Sweeva's
forward collision bumper on both sides
ON
OFF
EN