Download Print this page

Zap ACC518 Quick Start Manual page 2

Advertisement

This allows for installations where the exit button
isn't situated next to the door and a timed
released is required.
Mounting
Cut the hole for the electric bolt in the door
frame.
Ensure a channel or hole is made for the
cables and ensure they are protected by
using a protection guard or conduit if
exposed.
Then fix the lock to the door frame and the
plate to the door using the screws provided.
Connections
The strike locks are provided with screw terminals which can
be soldered to the incoming power connections.
Red
= +12V DC
Black = GND
Troubleshooting
If the door release is not activating the lock then there is likely a shorted wire, open circuit or some
other failed device in the circuit.
To identify where the fault is, each wired connection in the circuit needs to be tested; working from
the door release progress through, including the power supply and the lock.
If the fault is with the door release then check the connection wires for continuity and for trapped
wires. Check for water ingress on the wired connections. Check the polarity in the power connections
and ensure the connections are connected to the proper terminals.
Lock Type
Design
Voltage
Construction
Dimensions
All specifications are approximate. System Q Ltd reserves the right to change product specifications or features without notice. Whilst every effort is
made to ensure that these instructions are complete and accurate, System Q Ltd cannot be held responsible for any losses, no matter how they arise,
from errors or omissions in these instructions, or the performance or non-performance of the equipment refered to.
Document ref: qACC518-520
This symbol indicates that equipment must not be mixed with general household waste. For treatment, recovery and recycling please return to your local designated
WEE/CG0783SS collection point as defined by your local council.
ACC518
Fail Secure (NO)
12V DC / 230mA (Unlocked)
(H) 149 x (W) 37 x (D) 34mm
Zap is a registered trademark of System Q Ltd
Fail Safe (NC)
Mortice Mount
12V DC / 135mA (Locked)
Metal
Strike Locks
ACC520
© 2022 System Q Ltd
2

Advertisement

loading

This manual is also suitable for:

Acc520