Disposal; Ec Declaration Of Conformity - Stihl HT 56 C Instruction Manual

30 Disposal

courses and are supplied with the necessary
technical information.
When repairing the machine, only use replace‐
ment parts which have been approved by STIHL
for this power tool or are technically identical.
Only use high-quality replacement parts in order
to avoid the risk of accidents and damage to the
machine.
STIHL recommends the use of original STIHL
replacement parts.
Original STIHL parts can be identified by the
STIHL part number, the { logo and the
STIHL parts symbol K (the symbol may appear
alone on small parts).
30 Disposal
Contact the local authorities or your STIHL serv‐
icing dealer for information on disposal.
Improper disposal can be harmful to health and
pollute the environment.
► Take STIHL products including packaging to a
suitable collection point for recycling in accord‐
ance with local regulations.
► Do not dispose with domestic waste.
31 EC Declaration of Con‐
formity
ANDREAS STIHL AG & Co. KG
Badstr. 115
D-71336 Waiblingen
Germany
declare under our sole responsibility that
Designation:
Make:
Series:
Serial identification num‐
ber:
Displacement:
conforms to the relevant provisions of Directives
2011/65/EU, 2006/42/EC and 2014/30/EU and
0458-555-8321-C
Pole pruner
STIHL
HT 56 C
4139
3
27.2cm
has been developed and manufactured in com‐
pliance with the following standards in the ver‐
sions valid on the date of production:
EN ISO 11680‑1, EN 55012, EN 61000‑6‑1
The EC type examination was carried out by
DPLF
Deutsche Prüf- und Zertifizierungsstelle für Land-
und Forsttechnik GbR
(NB 0363)
Spremberger Straße1
D-64823 Groß-Umstadt
Certification no.
HT 56 C: D-EG 13.00494/01
Technical documents deposited at:
ANDREAS STIHL AG & Co. KG
Produktzulassung
The year of manufacture and serial number are
applied to the product.
Done at Waiblingen, 03.02.2020
ANDREAS STIHL AG & Co. KG
pp
Dr. Jürgen Hoffmann
Director Product Certification & Regulatory
Affairs
English
31