Assembling The Unit - Stihl HT 56 C Instruction Manual

English
3.4.4 Cutting above obstacles
The machine's long reach makes it possible to
prune branches that are overhanging obstacles,
such as rivers or lakes. The tool angle in this
case depends on the position of the branch.
3.4.5 Cutting from a lift bucket
The machine's long reach enables cutting to be
performed next to the trunk without the risk of the
lift bucket damaging other branches. The tool
angle in this case depends on the position of the
branch.
10
4

Assembling the Unit

The unit features a split drive tube that helps
save space during transportation. It unit can be
easily disassembled for transportation – see
"Transporting the Power Tool".
4.1 Connecting the Drive Tube
WARNING
Do not mount KombiTools – only use the drive
tube with the splined shaft supplied with the
machine.
► Pull the cap (1) off the end of the front drive
tube and keep it in a safe place for later use –
see "Storing the Machine".
► Put the powerhead on the ground so that it
rests on the machine support.
4
4 Assembling the Unit
1
2
3
0458-555-8321-C