Recovering Pre-Installed Software And Drivers - Gateway LT 1000 Reference Manual

Recovering pre-installed software and drivers

As a troubleshooting step, you may need to reinstall the
software and device drivers that came pre-installed on your
computer from the factory. You can recover using either your
hard drive or the backup discs you have created.
•
•
To recover your pre-installed software and drivers:
1
2
62
CHAPTER 7: Maintaining Your Notebook
New software—If you need to recover software that did
not come pre-installed on your computer, you need to
follow that software's installation instructions.
New device drivers—If you need to recover device
drivers that did not come pre-installed on your
computer, follow the instructions provided with the
device.
Click Start, All Programs, Gateway, then click Gateway
Recovery Management. Gateway Recovery
Management opens.
- OR -
If you are recovering from your driver and application
recovery disc, insert it into the disc drive, then go to
Step 3 after the Gateway Application Recovery main
menu opens.
Click the Restore tab, then click Reinstall
applications/drivers. The Gateway Application
Recovery main menu opens.