Vladimir's Models Yoda Recommendations For Assembly

Y ODA
Recommendations for assembly
A ccessory kit:
1. Rear short screws for fixing wing (M3x10 , 1 spare
screw);
2. Forward long screws for fixing wing (M3x14, 1 spare
screw);
3. Fuselage part of the wire for aileron servos with J ST
battery connector;
4. Y oda aileron servo hatches (left and right);
5. Y oda aileron rods (2pcs);
6. Y oda aileron horns (2 pcs);
7. Y oda aluminum flap horns (Snipe 2 aileron horns) (left
and right);
8. A ileron horn pins (D1x10, 2 pcs);
9. Y oda (Snipe 2) Ball link skrews; (2 pcs);
10. Y oda aileron rods (2 pcs);
11. A ileron clevises (with M2.5 thread);
12. Carboline SC 78 4/30 carbon for fixing aileron pins(1 pcs;
50x50 mm);
13. Y oda (Snipe 2) wing throwing peg;
14. Stabilizer fixing screws (M3x8, A luminum, 1 pc spare);
15. Elevator and rudder torsion springs;
16. Elevator and rudder control horns;
17. Pipes for the fixing control cables (1 spare);
18. Y oda (Snipe 2) ballast fixing part;
1) Superglue and liquid medium, the accelerator
2) Cutter
3) Masking tape
www.modellmarkt24.ch www.modellmarkt24.ch
1. The list of parts and materials to build:
1. Y oda wing;
2. Y oda fuselage;
3. Y oda (Snipe 2) horizontal stabilizer;
4. Y oda vertical stabilizer;
5. Y oda nose cone;
6. Y oda accessoires kit;
The list of materials needed to build the model:
Parts set:
4) Pen and ruler
5) Pliers
6) Sandpaper number 240-320
1