KBC ED-G Quick Start Manual

Introduction
The ED-G is an IP video encoder, decoder and public announcement system combo device. It features H.264 real-time video compression for
encoding analog video to IP or decoding IP video to analog, making the ED-G an ideal component of any surveillance solution that requires
both IP and analog streams.
Features
• H.264 or MPEG4 selectable compression
• NTSC/PAL support
• RS-485/422, 232 supports
• DI/DO bi-directional contact closure
Downloads
Full specifications, features and additional information can be found on the relevant product page on the KBC website as well as in the
downloads section: http://www.kbcnetworks.com/downloads
Precautions
• Do not attempt to open, disassemble, or modify the device
•
Do not use a third-party power adapter
• Do not expose this device to temperatures outside of the range of -10° C to +55° C
•
Do not expose the ED-G to environments outside of the following humidity range: 10-90% RH (non-condensing)
System Contents
Please check the following items before installation. If any items are missing, please contact the dealer.
Qty Description
1 ED-G
1 12V Power Supply
1 TV out RCA cable
1 Quick Start Guide
Connection
Refer to the illustration below when following the Configuration steps.
NOTE: Choose Option A if using the power supply. Choose Option B if using a Power over Ethernet (PoE) switch.
QSG-ED-G_Series-Rev1802
Copyright © KBC Networks 2018
ED-G
Quick Start Guide
IP Video Encoder/Decoder
www.kbcnetworks.com