Fujitsu 5GRUDB3 User Manual page 3

2.9.2 Radio Performance
General Specifications
Transmitter Specification
Receiver Specification
2.9.3 Power Supply
Electrical Specifications
DC Power Specification
3 Ordering Information
3.1 Radio Unit
3.2 Mounting Kits
3.3 Accessories
4 Installation
4.1 Unpack
4.2 Mounting
4.3 Installation Precautions
4.4 Returning of Defective Equipment
4.5 RU Installation
4.5.1 Installation Prerequisites
4.5.2 Attach L-Brackets and Eye Bolts
4.5.3 Attach RU Mounting Adapter Plate
4.5.4 Attach RU to Pole
4.5.5 Attach RU to Wall
4.6 Cable Installation
4.6.1 Connect Frame Ground Cable
4.6.2 Connect eCPRI Optical Cable
4.6.3 Connect AISG Cables
4.6.4 Connect RF Cables
4.6.5 Connect DC -48 V Power Cable
5 Power Up
5.1 Check Connections and DC Power Polarity
5.2 Apply Power to RU
5.3 Check LED Status
5.4 LED Display
5.5 Verify Alarm Status
5.6 RU Confirmation
6 Maintenance and Trouble Clearing
6.1 RU Alarms
6.2 Replace RU Mounted on Pole
6.3 Replace RU Mounted on Wall
·
Issue 1.1, May 2021
Release 1.0
3
p. 64
p. 65
p. 66
p. 74
p. 78
p. 79
p. 79
p. 80
p. 81
p. 82
p. 83
p. 84
p. 85
p. 86
p. 92
p. 94
p. 95
p. 95
p. 96
p. 97
p. 99
p. 105
p. 112
p. 112
p. 114
p. 120
p. 121
p. 123
p. 126
p. 128
p. 129
p. 130
p. 131
p. 133
p. 134
p. 135
p. 136
p. 140
p. 144
Fujitsu and Fujitsu Customer Use Only