Advertisement
Quick Links
3950 NW 120
The REC-AV XG adds video input (including rear camera) for select '06-'08 Chrysler/Dodge/Jeep
REC navigation radios. NOTE: The REC radio must possess the 3-pin camera port on the back
for this kit to be compatible.
Camera Input Harness
NTV-ASY142
Audio-IN Harness
NTV-ASY231
Plug and Play
T-Harness
NTV-HAR087
:
Agreement
End user agrees to use this product in compliance with all State and Federal laws. NAV-TV Corp. would not be held liable for
misuse of its product. If you do not agree, please discontinue use immediately and return product to place of purchase. This product is
intended for off-road use and passenger entertainment only.
th
Ave, Coral Springs, FL 33065 TEL 561-955-9770 FAX 561-955-9760
www.nav-tv.com
info@nav-tv.com
REC-AV XG
NTV-KIT276
Overview
Kit Contents
REC-AV XG Module
NTV-ASY171
USB Cable (updates)
NTV-CAB009
CAN Adapter Harness
NTV-HAR058
NTV-DOC 144
(2x) Audio RCA-3.5mm Adapter
NTV-CAB054
(3x) Male
barrel RCA
AVSW Harness
NTV-CON018
NTV-HAR066
AVSW NTV-ASY170
(NTV-KIT224 Optional)
1 |
JR, BM
09/03/15
rB5
P a g e
Advertisement
Related Manuals for Nav TV REC-AV XG
Summary of Contents for Nav TV REC-AV XG
- Page 1 REC-AV XG NTV-KIT276 Overview The REC-AV XG adds video input (including rear camera) for select ‘06-’08 Chrysler/Dodge/Jeep REC navigation radios. NOTE: The REC radio must possess the 3-pin camera port on the back for this kit to be compatible. Kit Contents (2x) Audio RCA-3.5mm Adapter...
- Page 2 JR, BM 09/03/15 NTV-DOC 144 REC-AV Programming Before the product is installed, be sure the module is programmed for needed functions. To change any one of the settings, double click the line with the feature to be enabled/disabled. Down Adjustable Parameter Description VES Emulation Emulates rear seat entertainment for AV input...
-
Page 3: Installation
JR, BM 09/03/15 NTV-DOC 144 Installation 1. Remove the radio from the dash. 2. Plug in the supplied T-harness between the radio and factory connection (22 pin connector.) 3. Connect the module to the harness and locate in a secure location in the dash (be sure to program the module for required features before installation.) 4. - Page 4 JR, BM 09/03/15 NTV-DOC 144 RIGHT (red) 4. For Audio IN, use the provided 10-PIN connector with RCA. You will need to populate the provided connector as shown here unless this vehicle possess this same connector with existing wires. If this connector exists in the car already, populate the factory connector instead as shown here: LEFT...
- Page 5 JR, BM 09/03/15 NTV-DOC 144 4. Plug the supplied 3-pin to RCA harness into the radio. Plug the other end into the Yellow RCA labeled “AV OUT” of the AV switcher. 5. The Front camera signal goes to the RCA labeled “V1” of the switcher. 6.
-
Page 6: Operation
JR, BM 09/03/15 NTV-DOC 144 Operation VES: Press the ‘MODE’ button until VES tab is highlighted. Once the tab is selected, the video input will automatically be displayed. Reverse Cam/Forced Cam: Double press the main power button on the radio. This will automatically display the backup camera regardless of gear or motion of the vehicle.
Need help?
Do you have a question about the REC-AV XG and is the answer not in the manual?
Questions and answers