Installing Mapsource Bluechart Software; Bluechart Card Caution And Unlock Disclaimer - Garmin MapSource User Manual

Installing MapSource BlueChart Software

With MapSource software, you can view color maps on a PC. You can also create
waypoints, routes, and map sets to transfer to your Garmin unit. MapSource
BlueChart data is in locked regions within each of the three coverage areas (Americas,
Atlantic, and Pacific). When you unlock a region, you can select the individual charts
that you want to use.
Refer to the MapSource BlueChart software for installation instructions.
Refer to page 9 for information about using MapSource BlueChart software.

BlueChart Card Caution and Unlock Disclaimer

CAUTION: Do not use preprogrammed BlueChart cards for saving MapSource
maps. The preprogrammed data will be lost. Remove any BlueChart cards in your
Garmin unit before transferring MapSource maps to the unit to avoid losing the
preprogrammed data. If you overwrite the preprogrammed data on a BlueChart card,
Garmin will not replace or recover the lost data.
DISCLAIMER: Your MapSource unlock code is valid for use with your own Garmin
unit. You must have a separate unique unlock code for each Garmin unit. If you
own more than one Garmin unit or upgrade to a new Garmin unit, you must have a
separate code for each Garmin unit. If you personally own two Garmin units, you
may obtain a second unlock code for the same region for your own personal use at no
additional charge. Simply repeat the unlock process for the second unit. No more than
two Garmin units may be unlocked with the purchase of a single unlock code. You
must purchase a new unlock code if you have already unlocked two Garmin units.
Information about obtaining additional unlock codes can be found at:
http://www.garmin.com/unlock/. This agreement provides a one-user license and it is
illegal to share this data with others. Garmin does not give refunds or exchanges for
MapSource unlock codes.
4